Knowledge Agora



Similar Articles

Title Development of Cold In-Place Recycling with Bitumen Emulsion and Biomass Bottom Ash
ID_Doc 10111
Authors Suárez-Macías, J; Terrones-Saeta, JM; Iglesias-Godino, FJ; Corpas-Iglesias, FA
Title Development of Cold In-Place Recycling with Bitumen Emulsion and Biomass Bottom Ash
Year 2021
Published Crystals, 11.0, 4
Abstract Power generation from biomass is one of the most promising energy sources available today. However, this industry has a series of wastes derived from its activity, mainly biomass fly ash and biomass bottom ash. Biomass bottom ash is a waste that has no current use and, in most cases, is deposited in landfills. In turn, road construction is one of the activities that produces the most pollution, as it requires huge amounts of raw materials. Therefore, this research proposes the use of biomass bottom ashes, in an unaltered form, for the formation of cold in-place recycling with bitumen emulsion. This type of mixture, which is highly sustainable owing to the use of a high percentage of waste, was made with reclaimed asphalt pavement, biomass bottom ash, water, and bitumen emulsion. To this end, the grading curve of the materials was analyzed, different bituminous mixtures were made with varying percentages of emulsion and water, and the mechanical properties of the mixtures were analyzed. At the same time, the same type of mix was made with reclaimed asphalt pavement and commercial limestone aggregate, in order to compare the results. The tests showed a better mechanical behavior of the bituminous mixes made with biomass bottom ash, maintaining physical properties similar to those of conventional mixes. In short, it was confirmed that the production of this type of mix with biomass bottom ash was feasible, creating sustainable materials that reuse currently unused waste and avoid landfill disposal.
PDF https://www.mdpi.com/2073-4352/11/4/384/pdf?version=1618994423

Similar Articles

ID Score Article
29295 Suárez-Macías, J; Terrones-Saeta, JM; Iglesias-Godino, FJ; Corpas-Iglesias, FA Study of the Incorporation of Biomass Bottom Ash as a Filler for Discontinuous Grading Bituminous Mixtures with Bitumen Emulsion(2021)Applied Sciences-Basel, 11.0, 8
7660 Terrones-Saeta, JM; Iglesias-Godino, FJ; Corpas-Iglesias, FA; Martínez-García, C Study of the Incorporation of Ladle Furnace Slag in the Manufacture of Cold In-Place Recycling with Bitumen Emulsion(2020)Materials, 13, 21
20853 Blasenbauer, D; Huber, F; Maehl, J; Fellner, J; Lederer, J Comparing the quantity and quality of glass, metals, and minerals present in waste incineration bottom ashes from a fluidized bed and a grate incinerator(2023)
9453 Taleb-Ahmed, A; Montrelay, N; Houessou, KJ; Queneudec-t'Kint, M; Sebaibi, N; Dheilly, RM Influence of the Mass Percentage of Bottom Ash and Its State of Maturation on the Mechanical Performance of a Bio-Composite(2024)Buildings, 14.0, 8
12415 Vaitkus, A; Grazulyte, J; Sernas, O; Vorobjovas, V; Kleiziene, R An algorithm for the use of MSWI bottom ash as a building material in road pavement structural layers(2019)
13752 Kalantari, M Cold Recycling With Foamed Bitumen, Gained Knowledge From A Test Track In Germany(2023)Roads And Bridges-Drogi I Mosty, 22, 4
27770 Ingrassia, LP; Lu, XH; Ferrotti, G; Canestrari, F Renewable materials in bituminous binders and mixtures: Speculative pretext or reliable opportunity?(2019)
8710 Petrov, P; Stefanova, V Bottom Ash Utilization In Reclamation Of Disturbed Terrains(2022)International Journal Of Conservation Science, 13.0, 3
6425 Terrones-Saeta, JM; Suárez-Macías, J; Iglesias-Godino, FJ; Corpas-Iglesias, FA Study of the Incorporation of Biomass Bottom Ashes in Ceramic Materials for the Manufacture of Bricks and Evaluation of Their Leachates(2020)Materials, 13, 9
21927 Pazzini, M; Tarsi, G; Tataranni, P; Lantieri, C; Dondi, G Mechanical Characterization of Thin Asphalt Overlay Mixtures with 100% Recycled Aggregates(2023)Materials, 16.0, 1
Scroll