| Title | Synergetic-Complementary Use of Industrial Solid Wastes to Prepare High-Performance Rapid Repair Mortar |
|---|---|
| ID_Doc | 10796 |
| Authors | Li, JW; Xu, D; Wang, XJ; Wang, K; Wang, WL |
| Title | Synergetic-Complementary Use of Industrial Solid Wastes to Prepare High-Performance Rapid Repair Mortar |
| Year | 2021 |
| Published | |
| Abstract | With the vigorous development of infrastructure engineering, there are growing demands for high-performance rapid repair mortar, especially those using environmental-friendly and low-carbon cementitious materials. Hereupon, this work explored an innovative approach for rapid repair mortar preparation using solid waste-based calcium sulfoaluminate cement. The calcium sulfoaluminate cement was first prepared via synergetic-complementary use of industrial solid wastes and then adopted to prepare rapid repair mortar by proportionally mixing with standard sand and four additives (i.e., polycarboxylate superplasticizer, lithium carbonate, boric acid, and latex powder). The mechanistic analysis indicated that the four additives comprehensively optimized the mechanical strengths, fluidity, and setting time of rapid repair mortar by adjusting the hydration process of calcium sulfoaluminate cement. The test results showed that the 2-h compressive and flexural strength, and 1-day bonding strength of the prepared rapid repair mortar were 32.5, 9.2, and 2.01 MPa, respectively, indicating excellent early-age mechanical performance. In addition, the 28-day compressive and flexural strengths of the rapid repair mortar reached 71.8 and 17.7 MPa. Finally, a life cycle assessment and economic analysis indicated that this approach achieved environmental-friendly utilization of industrial solid wastes, and cost-effective and energy-saving natures, which supports current trends towards a circular economy and green sustainable development. |
Similar Articles
| ID | Score | Article |
|---|---|---|
14086
|
Sargent, P; Sandanayake, M; Law, DW; Hughes, DJ; Shifa, F; Borthwick, B; Scott, P Strength, mineralogical, microstructural and CO2 emission assessment of waste mortars comprising excavated soil, scallop shells and blast furnace slag(2024) | |
| 15140
|
Astoveza, J; Trauchessec, R; Soth, R; Pontikes, Y Properties of calcium aluminate blended cement incorporating iron-rich slag: Evolution over a curing period of 1 year(2021) | |
| 19007
|
Li, YL; Yuan, Q; Li, JB Calcined Cutter Soil Mixing Residue-Based Alkali-Activated Cement: Compressive Strengths, Reaction Products, and Sustainability(2022)Acs Sustainable Chemistry & Engineering, 10.0, 1 | |
| 15845
|
Li, YL; Yin, J; Yuan, Q; Huang, TJ; He, JG; Li, JB Fresh and hardened properties of cement paste and mortar incorporating calcined cutter soil mixing residue(2022) | |
| 15007
|
Dwivedi, A; Bollam, R; Gupta, S Enhancement of engineering properties of cement mortars with masonry construction and demolition fines via carbon dioxide utilization, storage and chemical treatment(2024) | |
| 4782
|
Soares, EG; Castro-Gomes, J; Sitarz, M; Zdeb, T; Hager, I; Hassan, K; Al-Kuwari, MS Feasibility for co-utilisation of Carbonated Reactive Magnesia Cement (CRMC) and industrial wastes in circular economy and CO2 mineralisation(2022) | |
| 14371
|
Nasir, M; Adesina, A; Bahraq, AA; Aziz, MA; Mahmood, AH; Ibrahim, M; Yusuf, MO Strength, Microstructure, and Life Cycle Assessment of Silicomanganese Fume, Silica Fume, and Portland Cement Composites Designed Using Taguchi Method(2024)Journal Of Materials In Civil Engineering, 36, 7 | |
| 14507
|
Baggio, TF; Possan, E; Andrade, JJD Physical-chemical characterization of construction and demolition waste powder with thermomechanical activation for use as supplementary cementitious material(2024) | |
| 5061
|
Wijesekara, DA; Sargent, P; Hughes, DJ; Ennis, CJ Sintered Bottom and Vitrified Silica Ashes Derived from Incinerated Municipal Solid Waste as Circular Economy-Friendly Partial Replacements for Cement in Mortars(2024)Waste And Biomass Valorization, 15, 5 | |
| 15058
|
Seifi, S; Sebaibi, N; Levacher, D; Boutouil, M Mechanical performance of a dry mortar without cement, based on paper fly ash and blast furnace slag(2019) |