Knowledge Agora



Similar Articles

Title Thermodynamic and economic analysis of a deployable and scalable process to recover Monomer-Grade styrene from waste polystyrene
ID_Doc 12468
Authors Reed, MR; Belden, ER; Kazantzis, NK; Timko, MT; Castro-Dominguez, B
Title Thermodynamic and economic analysis of a deployable and scalable process to recover Monomer-Grade styrene from waste polystyrene
Year 2024
Published
Abstract Less than 5% of polystyrene is recycled, motivating a search for energy efficient and economical methods for polystyrene recycling that can be deployed at scale. One option is chemical recycling, consisting of thermal depolymerization and purification to produce monomer-grade styrene (>99%) and other co-products. Thermal depolymerization and distillation are readily scalable, well-established technologies; however, to be considered practical, they must be thermodynamically efficient, economically feasible, and environmentally responsible. Accordingly, mass and energy balances of a pyrolysis reactor for thermal depolymerization and two distillation columns to separate styrene from alpha-methyl styrene, styrene dimer, toluene, and ethyl benzene co-products, were simulated using ASPEN to evaluate thermodynamic and economic feasibility. These simulations indicate that monomer-grade styrene can be recovered with energy inputs <10MJ/kg, comparable to the energy content of pyrolysis co-products. Thermodynamic sensitivity analysis indicates the scope to reduce these values and enhance the robustness of the predictions. A probabilistic economic analysis of multiple scenarios combined with detailed sensitivity analysis indicates that the cost for recycled styrene is approximately twice the historical market value of fossil-derived styrene when styrene costs are fixed at 15% of the total product cost or less than the historical value when feedstock costs are assumed to be zero. A Monte Carlo and Net Present Value-based economic performance analysis indicates that chemical recycling is economically viable for scenarios assuming realistic feedstock costs. Furthermore, the CO2 abatement cost is roughly $1.5 per ton of averted CO2, relative to a pyrolysis process system to produce fuels. As much as 60% of all polystyrene used today could be replaced by chemically recycled styrene, thus quantifying the potential benefits of this readily scalable approach.
PDF https://doi.org/10.1016/j.cej.2024.152079

Similar Articles

ID Score Article
23146 Royuela, D; Veses, A; Martínez, JD; Callén, MS; López, JM; García, T; Murillo, R Thermochemical recycling of polystyrene waste by pyrolysis using a pilot-scale auger reactor: Process demonstration in a relevant environment(2024)
17200 Gracida-Alvarez, UR; Benavides, PT; Lee, US; Wang, MC Life-cycle analysis of recycling of post-use plastic to plastic via pyrolysis(2023)
17823 Musivand, S; Bracciale, MP; Damizia, M; De Filippis, P; de Caprariis, B Viable Recycling of Polystyrene via Hydrothermal Liquefaction and Pyrolysis(2023)Energies, 16, 13
26791 Cuevas, AB; Leiva-Candia, DE; Dorado, MP An Overview of Pyrolysis as Waste Treatment to Produce Eco-Energy(2024)Energies, 17, 12
27442 Gracida-Alvarez, UR; Winjobi, O; Sacramento-Rivera, JC; Shonnard, DR System Analyses of High-Value Chemicals and Fuels from a Waste High-Density Polyethylene Refinery. Part 1: Conceptual Design and Techno-Economic Assessment(2019)Acs Sustainable Chemistry & Engineering, 7.0, 22
18522 Hernández, B; Kots, P; Selvam, E; Vlachos, DG; Ierapetritou, MG Techno-Economic and Life Cycle Analyses of Thermochemical Upcycling Technologies of Low-Density Polyethylene Waste(2023)Acs Sustainable Chemistry & Engineering, 11.0, 18
14404 Lameh, M; Abbas, A; Azizi, F; Zeaiter, J A simulation-based analysis for the performance of thermal solar energy for pyrolysis applications(2021)International Journal Of Energy Research, 45, 10
25851 Baena-González, J; Santamaria-Echart, A; Aguirre, JL; González, S Chemical recycling of plastic waste: Bitumen, solvents, and polystyrene from pyrolysis oil(2020)
13111 Das, S; Liang, C; Dunn, JB Plastics to fuel or plastics: Life cycle assessment-based evaluation of different options for pyrolysis at end-of-life(2022)
22824 Dogu, O; Pelucchi, M; Van de Vijver, R; Van Steenberge, PHM; D'hooge, DR; Cuoci, A; Mehl, M; Frassoldati, A; Faravelli, T; Van Geem, KM The chemistry of chemical recycling of solid plastic waste via pyrolysis and gasification: State-of-the-art, challenges, and future directions(2021)
Scroll