| Title | Plastic recycling in a circular economy; determining environmental performance through an LCA matrix model approach |
|---|---|
| ID_Doc | 1303 |
| Authors | Schwarz, AE; Ligthart, TN; Bizarro, DG; De Wild, PD; Vreugdenhil, B; van Harmelen, TV |
| Title | Plastic recycling in a circular economy; determining environmental performance through an LCA matrix model approach |
| Year | 2021 |
| Published | |
| Abstract | To ensure a circular economy for plastics, insights in the environmental impacts of recycling and optimal recycling choices for specific plastic polymers are crucial. This was obtained by determining the environmental performance of 10 selected recycling technologies with varying TRL levels, using the chemical properties of the top 25 produced polymers in Europe. The results were collected in a life cycle assessment (LCA) 'matrix' model. To simulate realistic plastic recycling challenges, case studies of PE/PP foils from municipal waste and ABS plastic with brominated flame retardants were developed, to be used as an addition to the LCA matrix model results. Potential emission reduction was assessed by combining LCA matrix outcomes with European polymer demand data. The LCA matrix model illustrates that potential environmental performance of recycling technologies varied strongly per polymer type and did not always follow the state-of-the-art recycling hierarchy. Commodity plastics performed well with tertiary recycling technologies, such as gasification and pyrolysis to monomers; secondary mechanical recycling was outperformed. A focus on primary recycling is environmentally beneficial for most engineering and high performance plastics. To enhance the performance of primary recycling technologies, a higher purity and improved sorting is required. As demonstrated in the case studies, low sorting efficiencies due to impurities reduces positive environmental impacts. Hence, optimal environmental performance of recycling is obtained where pre-treatment (sorting, cleaning) is adapted to the recycling technology. According to the model, recycling the 15 most demanded polymers in Europe reduces CO2 emissions from plastics by 73% or 200 Mtonne CO2 eq. (c) 2020 The Author(s). Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/). |
| https://doi.org/10.1016/j.wasman.2020.12.020 |
Similar Articles
| ID | Score | Article |
|---|---|---|
3734
|
Meys, R; Frick, F; Westhues, S; Sternberg, A; Klankermayer, J; Bardow, A Towards a circular economy for plastic packaging wastes - the environmental potential of chemical recycling(2020) | |
| 18160
|
Lase, IS; Tonini, D; Caro, D; Albizzati, PF; Cristobal, J; Roosen, M; Kusenberg, M; Ragaert, K; Van Geem, KM; Dewulf, J; De Meester, S How much can chemical recycling contribute to plastic waste recycling in Europe? An assessment using material flow analysis modeling(2023) | |
| 29250
|
Schulte, A; Kampmann, B; Galafton, C Measuring the Circularity and Impact Reduction Potential of Post-Industrial and Post-Consumer Recycled Plastics(2023)Sustainability, 15.0, 16 | |
| 27077
|
Volk, R; Stallkamp, C; Steins, JJ; Yogish, SP; Muller, RC; Stapf, D; Schultmann, F Techno-economic assessment and comparison of different plastic recycling pathways: A German case study(2021)Journal Of Industrial Ecology, 25.0, 5 | |
| 25296
|
Uekert, T; Singh, A; DesVeaux, JS; Ghosh, T; Bhatt, A; Yadav, G; Afzal, S; Walzberg, J; Knauer, KM; Nicholson, SR; Beckham, GT; Carpenter, AC Technical, Economic, and Environmental Comparison of Closed- Loop Recycling Technologies for Common Plastics(2023)Acs Sustainable Chemistry & Engineering, 11, 3 | |
| 21326
|
Solis, M; Silveira, S Technologies for chemical recycling of household plastics - A technical review and TRL assessment(2020) | |
| 28975
|
Nordahl, SL; Scown, CD Recommendations for life-cycle assessment of recyclable plastics in a circular economy(2024)Chemical Science, 15.0, 25 | |
| 22229
|
Faraca, G; Martinez-Sanchez, V; Astrup, TF Environmental life cycle cost assessment: Recycling of hard plastic waste collected at Danish recycling centres(2019) | |
| 4615
|
Venkatachalam, V; Pohler, M; Spierling, S; Nickel, L; Barner, L; Endres, HJ Design for Recycling Strategies Based on the Life Cycle Assessment and End of Life Options of Plastics in a Circular Economy(2022)Macromolecular Chemistry And Physics, 223, 13 | |
| 17052
|
Jeswani, H; Krüger, C; Russ, M; Horlacher, M; Antony, F; Hann, S; Azapagic, A Life cycle environmental impacts of chemical recycling via pyrolysis of mixed plastic waste in comparison with mechanical recycling and energy recovery(2021) |