Knowledge Agora



Similar Articles

Title Acoustic wave propagation through eco-friendly porous panels at normal incidence
ID_Doc 13254
Authors Aygun, H; Gomez-Agustina, L; Mundula, S
Title Acoustic wave propagation through eco-friendly porous panels at normal incidence
Year 2023
Published Building Acoustics, 30, 4
Abstract Human and non-human subjects are exposed to micro plastics through drink, food, and air. Micro-plastics propagating through atmosphere are breathable particles during inhalation and exhalation leading to deposition of them in the deep lung via the alveoli of the lungs. Teabags are made of plastics that are not recyclable and biodegradable. Therefore, we intend to remove used teabags from the natural environment by repurposing them to make sound attenuating panels for building and architectural industries, contributing in this way to a sustainable circular economy. The panels were designed and developed from consumed teabags as porous material by filling a frame to investigate acoustics wave propagation through them at normal incidence. Experimental testing was carried out on circular teabag panels in an impedance tube using a transfer function method to determine their sound absorption coefficient and transmission loss. Furthermore, the impedance gun method was used to determine the absorption properties of square panels. Results show that 75 mm thick circular panels give an absorption coefficient higher than 0.8 between 400 and 1600 Hz. Up-to 9.8 dB sound transmission loss of circular panels is obtained at higher frequencies. Absorption coefficients for square teabag panels are very good despite a coincidence-dip seen at 800 Hz. The satisfactory sound absorption and sound transmission characteristics of acoustic panels made of consumed tea bags can make this recycled material a cost-effective solution in the production of sustainable acoustic treatment in indoor spaces. The results suggest that recycling of consumed teabag as the panel could be applied as alternative sound absorbing materials.
PDF https://journals.sagepub.com/doi/pdf/10.1177/1351010X231202014

Similar Articles

ID Score Article
25232 Del Rey, R; Amorós, JEC; Tur, JE; Alba, J Study of Acoustic Prototypes Based on Plastic Cap Waste(2024)Buildings, 14, 6
28476 Neri, M; Levi, E; Cuerva, E; Pardo-Bosch, F; Zabaleta, AG; Pujadas, P Sound Absorbing and Insulating Low-Cost Panels from End-of-Life Household Materials for the Development of Vulnerable Contexts in Circular Economy Perspective(2021)Applied Sciences-Basel, 11.0, 12
21229 Naimusin, A; Janusevicius, T Integration of Acoustic Metamaterials Made of Plastic to Improve Building Acoustics(2024)Environmental And Climate Technologies, 28.0, 1
10364 Oliveira, MA; Antonio, J Animal-based waste for building acoustic applications: A review(2024)
24664 Rubino, C; Aracil, MB; Gisbert-Payá, J; Liuzzi, S; Stefanizzi, P; Cantó, MZ; Martellotta, F Composite Eco-Friendly Sound Absorbing Materials Made of Recycled Textile Waste and Biopolymers(2019)Materials, 12, 23
26763 Taban, E; Amininasab, S; Soltani, P; Berardi, U; Abdi, DD; Samaei, SE Use of date palm waste fibers as sound absorption material(2021)
24171 Naimusin, A; Janusevicius, T Development and Research of Recyclable Composite Metamaterial Structures Made of Plastic and Rubber Waste to Reduce Indoor Noise and Reverberation(2023)Sustainability, 15, 2
21176 Neri, M Thermal and Acoustic Characterization of Innovative and Unconventional Panels Made of Reused Materials(2022)Atmosphere, 13.0, 11
8524 Galindo, M; Alberdi, E; Sánchez-Burgos, MA; Nieves, FJ; Flores-Colen, I Polypropylene as an absorbent layer for acoustic ceilings: Sound absorption and life cycle assessment(2024)
25227 Liuzzi, S; Rubino, C; Stefanizzi, P; Martellotta, F Performance Characterization of Broad Band Sustainable Sound Absorbers Made of Almond Skins(2020)Materials, 13, 23
Scroll