Knowledge Agora



Similar Articles

Title Valorization potential of dried tannery fleshing wastes (TFW) through pyrolysis in the leather industry: Kinetic and thermodynamic investigations
ID_Doc 13450
Authors Chagtmi, R; Trabelsi, AB; Ben Abdallah, A; Maaoui, A; Lopez, G; Cortazar, M; Khedira, H; Chaden, C; Olazar, M
Title Valorization potential of dried tannery fleshing wastes (TFW) through pyrolysis in the leather industry: Kinetic and thermodynamic investigations
Year 2023
Published
Abstract Since the moisture content of the tannery fleshing waste (TFW) of the leather industry is too high, this paper evaluates the effects of open air and greenhouse drying pretreatment on the valori-zation potential of these wastes by pyrolysis. The pyrolysis behavior and kinetics were studied using KAS and Starink model-free methods and the reaction mechanisms of both dried TFW samples were established by the Coats-Redfern model. The activation energy (E & alpha;) calculated by KAS and Starink methods were similar for both samples, resulting in 121.71, 149.32 and 169.80 kJ mol-1 for TFW-OD and 155.41, 203.33 and 175.19 kJ mol-1 for TFW-GD in the first, second and third stages respectively. Moreover, the performance of two drying approaches on the behavior of TFW slow pyrolysis was studied at 500 degrees C and focused on biochar production to improve the feasibility of the TFW pyrolysis process, with the main goal of moving towards circular economy in the leather industry. The obtained results revealed that produced biochars are not suitable for either subsequent energetic valorization as fuels (H/C > 0.7). However, they showed a great potential for soil amendment (R50 = 0.11-0.12), long-term carbon storage (O/C < 0.4), fertilizers or sorbent for tannery wastewater treatment where adsorption of dyes is essential. Amongst the drying pretreatments, the open-air drying method proved to be the most suitable for industrial scale unit to convert TFW into economic value biochar.
PDF

Similar Articles

ID Score Article
4179 Ali, AM; Khan, A; Shahbaz, M; Rashid, MI; Imran, M; Shahzad, K; Mahpudz, AB A renewable and sustainable framework for clean fuel towards circular economy for solid waste generation in leather tanneries(2023)
5560 Jaffari, ZH; Hong, J; Park, KY A systematic review of innovations in tannery solid waste treatment: A viable solution for the circular economy(2024)
15310 Velusamy, M; Chakali, B; Ganesan, S; Tinwala, F; Venkatachalam, SS Investigation on pyrolysis and incineration of chrome-tanned solid waste from tanneries for effective treatment and disposal: an experimental study(2020)Environmental Science And Pollution Research, 27, 24
10241 Liu, ZW; Yang, YY; Xie, M; Cheng, MQ; Yang, RH; Huang, ZC; Zhou, T; Zhao, YC; Yang, JZ; Die, QQ; Li, B TG-FTIR-Py-GCMS analysis and catalytic pyrolysis mechanism of textile waste by red mud catalyst for liquid fuel production(2024)
15836 Moktadir, MA; Ren, JZ; Zhou, JZ A systematic review on tannery sludge to energy route: Current practices, impacts, strategies, and future directions(2023)
5276 Kordoghli, S; Fassatoui, E; Jeguirim, M; Zorpas, AA; Khiari, B Experimental and feasibility study of bio-waste valorization through pyrolysis for energy and materials production in the concept of circular economy(2024)
28774 Cabrera-Codony, A; Ruiz, B; Gil, RR; Popartan, LA; Santos-Clotas, E; Martín, MJ; Fuente, E From biocollagenic waste to efficient biogas purification: Applying circular economy in the leather industry(2021)
28761 Chojnacka, K; Skrzypczak, D; Mikula, K; Witek-Krowiak, A; Izydorczyk, G; Kuligowski, K; Bandrow, P; Kulazynski, M Progress in sustainable technologies of leather wastes valorization as solutions for the circular economy(2021)
10366 Racek, J; Chorazy, T; Miino, MC; Vrsanská, M; Brtnicky, M; Mravcová, L; Kucerík, J; Hlavínek, P Biochar production from the pyrolysis of food waste: Characterization and implications for its use(2024)
22062 Haddad, K; Hantous, A; Chagtmi, R; Khedhira, H; Chaden, C; Trabelsi, AB Industrial dye removal from tannery wastewater by using biochar produced from tannery fleshing waste: a road to circular economy(2022)
Scroll