Knowledge Agora



Similar Articles

Title Effects of the addition of fatty acid from soybean oil sludge in recycled asphalt mixtures
ID_Doc 13921
Authors Neto, OD; Lucena, LCDL; Silva, IM; Lucena, LDL; Mendonça, AMGD; Lopes, AMD; da Silva, FMM; de Amorim, AG; de Oliveira Neto, HRD
Title Effects of the addition of fatty acid from soybean oil sludge in recycled asphalt mixtures
Year 2023
Published Environmental Science And Pollution Research, 30, 17
Abstract Recycling agents provide better additions of reclaimed asphalt pavement (RAP) in the production of new asphalt mixtures. Alternative and residual materials that have the potential as asphalt binder viscosity reducers have gained visibility in the field of paving due to the perspective of circular economy in recycled mixtures. Soybean oil sludge fatty acid is a material produced from soybean oil sludge, a waste generated in the soybean oil refining step. Thus, this paper investigated the physical, chemical, and rheological effects of the asphalt binder PG 64-XX modified by the fatty acid of soybean oil sludge in the contents of 6% and 7% by weight of the binder. The modified binder samples were submitted to penetration tests, softening point, rotational viscosity, performance grade (PG), before and after short-term aging (RTFO), and multiple stress creep and recovery (MSCR). A control asphalt mixture and recycled asphalt mixtures produced with 40% RAP and fatty acid-modified binders were subjected to tensile strength, induced moisture damage, resilient modulus, and fatigue life. A Student's t statistical test verified the significance of the data, as well as the estimation of production costs of these asphalt mixtures. The use of the fatty acid significantly reduced the stiffness and viscosity of the control asphalt binder, decreasing the mixing temperatures at 14 degrees C and 17 degrees C to 6% and 7%, respectively. Using higher fatty acid contents from soybean oil sludge significantly improved the performance of recycled mixtures in tensile strength, moisture damage, and fatigue life. The production cost of recycled asphalt mixtures was lower than that of the control mixture.
PDF

Similar Articles

ID Score Article
15110 Neto, ODM; Silva, IM; Lucena, LCDL; Lucena, LDL; Mendonca, AMGD; de Lima, RKB Viability of recycled asphalt mixtures with soybean oil sludge fatty acid(2022)
13552 Ding, Z; Jiang, XM; Li, HF; Li, PL; Chen, JR Influences of Waste-Utilizing Rejuvenator on Properties of Recycled Asphalt Binders(2023)Journal Of Materials In Civil Engineering, 35, 1
22607 Di Mino, G; Vijayan, V; Eskandarsefat, S; Venturini, L; Mantalovas, K Investigating the Multi-Recyclability of Recycled Plastic-Modified Asphalt Mixtures(2023)Infrastructures, 8.0, 5
4411 da Costa, LF; Neto, ODM; de Macêdo, ALF; Lucena, LCDL; Lucena, LDL Optimizing recycled asphalt mixtures with zeolite, cottonseed oil, and varied RAP content for enhanced performance and circular economy impact(2024)
9492 Neto, ODM; Silva, IM; Lucena, LCDL; Lucena, LDL; de Sousa, TM; Hu, JW; Youssef, A Assessment of rheological properties of asphalt binder modified with babassu oil(2024)
26404 Rodrigues, C; Capitao, S; Picado-Santos, L; Almeida, A Full Recycling of Asphalt Concrete with Waste Cooking Oil as Rejuvenator and LDPE from Urban Waste as Binder Modifier(2020)Sustainability, 12, 19
21746 Porto, M; Caputo, P; Loise, V; Abe, AA; Tarsi, G; Sangiorgi, C; Gallo, F; Rossi, CO Preliminary Study on New Alternative Binders through Re-Refined Engine Oil Bottoms (REOBs) and Industrial By-Product Additives(2021)Molecules, 26.0, 23
3723 Vijayan, V; Manthos, E; Mantalovas, K; Di Mino, G Multi-recyclability of asphalt mixtures modified with recycled plastic: Towards a circular economy(2024)
22503 Jain, S; Chandrappa, AK Performance and Life Cycle Assessment of Recycled Mixtures Incorporating Reclaimed Asphalt and Waste Cooking Oil as Rejuvenator: Emphasis on Circular Economy(2024)Journal Of Materials In Civil Engineering, 36.0, 7
15208 Rajib, AI; Samieadel, A; Zalghout, A; Kaloush, KE; Sharma, BK; Fini, EH Do all rejuvenators improve asphalt performance?(2022)Road Materials And Pavement Design, 23, 2
Scroll