| Title | Sewage treatment sludge biochar activated blast furnace slag as a low carbon binder for soft soil stabilisation |
|---|---|
| ID_Doc | 14125 |
| Authors | Gonzalez, J; Sargent, P; Ennis, C |
| Title | Sewage treatment sludge biochar activated blast furnace slag as a low carbon binder for soft soil stabilisation |
| Year | 2021 |
| Published | |
| Abstract | Portland cement forms the basis of most binders used in deep dry soil mixing, significantly improving the shear strength and compressibility properties of soils. However, due to the high environmental and socio-economic impacts of cement production, there is great interest in developing alternative low-carbon binders for soil stabilisation. One of the most desirable routes involves the use of industrial by-products, such as ground granulated blast furnace slag, whose pozzolanic properties require activation by alkali agents. This paper assesses the feasibility of using sewage treatment sludge biochar as a low-carbon 100% waste-based alternative to traditional alkali agents. Two biochar:slag ratios (0.5:0.5 and 0.67:0.33) were added to an artificial soil at dosages of 7.5 and 10% by dry weight and cured for up to 56 days. The engineering performance of these stabilised soil mixtures was assessed by performing a suite of compressive strength, pH, water content, mineralogical and microstructural analyses. Results were compared with those of untreated and CEM-II stabilised alluvium, along with data published in the literature. Biochar was observed to successfully activate the pozzolanic properties of the slag, whereby the studied mixtures resulted in 28-day strengths that met European soil stabilisation standards requirements. Binder mixtures with higher biochar concentrations achieved greater strengths. The best performing mixture had a biochar-slag ratio of 0.67:0.33 and dosage of 10%, which produced strengths up to 1243 kPa. This study suggests that the biochar-slag binder has encouraging prospects for replacing Portland cements in soil stabilisation, reducing the carbon footprint of the construction sector and improving the circular economy. |
Similar Articles
| ID | Score | Article |
|---|---|---|
27691
|
Sargent, P; Gonzalez, J; Ennis, CJ Compressibility, Structure, and Leaching Assessments of an Alluvium Stabilized with a Biochar-Slag Binder(2023)Journal Of Geotechnical And Geoenvironmental Engineering, 149.0, 12 | |
| 8748
|
Gomes, SD; Zhou, JL; Zeng, XH; Long, GC Water treatment sludge conversion to biochar as cementitious material in cement composite(2022) | |
| 13509
|
Mayilswamy, N; Nighojkar, A; Edirisinghe, M; Sundaram, S; Kandasubramanian, B Sludge-derived biochar: Physicochemical characteristics for environmental remediation(2023)Applied Physics Reviews, 10, 3 | |
| 14579
|
Sargent, P; Rouainia, M; Diambra, A; Nash, D; Hughes, PN Small to large strain mechanical behaviour of an alluvium stabilised with low carbon secondary minerals(2020) | |
| 22180
|
Czop, M; Lazniewska-Piekarczyk, B Use of Slag from the Combustion of Solid Municipal Waste as A Partial Replacement of Cement in Mortar and Concrete(2020)Materials, 13.0, 7 | |
| 2917
|
Khan, R; Shukla, S; Kumar, M; Zuorro, A; Pandey, A Sewage sludge derived biochar and its potential for sustainable environment in circular economy: Advantages and challenges(2023) | |
| 14086
|
Sargent, P; Sandanayake, M; Law, DW; Hughes, DJ; Shifa, F; Borthwick, B; Scott, P Strength, mineralogical, microstructural and CO2 emission assessment of waste mortars comprising excavated soil, scallop shells and blast furnace slag(2024) | |
| 15644
|
Nicula, LM; Manea, DL; Simedru, D; Cadar, O; Dragomir, ML; Ardelean, I; Corbu, O Potential Role of GGBS and ACBFS Blast Furnace Slag at 90 Days for Application in Rigid Concrete Pavements(2023)Materials, 16, 17 | |
| 15143
|
Ulewicz, M; Jura, J; Zielinski, A; Pietraszek, J The Application of Converter Sludge and Slag to Produce Ecological Cement Mortars(2024)Materials, 17, 17 | |
| 29334
|
Legan, M; Gotvajn, AZ; Zupan, K Potential of biochar use in building materials(2022) |