| Title | Transportation fuel from plastic: Two cases of study |
|---|---|
| ID_Doc | 16407 |
| Authors | Faussone, GC |
| Title | Transportation fuel from plastic: Two cases of study |
| Year | 2018 |
| Published | |
| Abstract | Synthesis of liquid fuels from waste is a promising pathway for reducing the carbon footprint of transportation industry and optimizing waste management towards zero landfilling. The study of commercial plants that conduct pyrolysis of plastics from post-consumer recycled materials and directly mine from old landfills without any pre-treatment has revealed two cases that show the feasibility of manufacturing transportation fuels via these methods. Pyrolysis oil, consisting of almost 26% hydrocarbons within the gasoline range and almost 70% within the diesel range, is upgraded to transportation fuel in the existing refinery. A batch operating plant is able to deliver relatively good quality pyrolysis oil from post-consumer plastic waste, owing to the catalyst employed. Simple distillation was also evaluated as an alternative and cheaper upgrading process into transportation fuels, meeting EN590 diesel and 1508217 marine fuel standards. Even though the two installations are outside the European Union, they represent good examples of the "circular economy" concept envisaged by the European Union via its ambitious "Circular Economy Package [1]", providing real world data for comparison with other experimental and lab results. (C) 2017 Elsevier Ltd. All rights reserved. |
Similar Articles
| ID | Score | Article |
|---|---|---|
17677
|
Pacheco-López, A; Lechtenberg, F; Somoza-Tornos, A; Graells, M; Espuña, A Economic and Environmental Assessment of Plastic Waste Pyrolysis Products and Biofuels as Substitutes for Fossil-Based Fuels(2021) | |
| 15283
|
Mangesh, VL; Tamizhdurai, P; Krishnan, PS; Narayanan, S; Umasankar, S; Padmanabhan, S; Shanthi, K Green energy: Hydroprocessing waste polypropylene to produce transport fuel(2020) | |
| 24647
|
Qureshi, MS; Oasmaa, A; Pihkola, H; Deviatkin, I; Tenhunen, A; Mannila, J; Minkkinen, H; Pohjakallio, M; Laine-Ylijoki, J Pyrolysis of plastic waste: Opportunities and challenges(2020) | |
| 4067
|
Erkmen, B; Ozdogan, A; Ezdesir, A; Celik, G Can Pyrolysis Oil Be Used as a Feedstock to Close the Gap in the Circular Economy of Polyolefins?(2023)Polymers, 15, 4 | |
| 22395
|
Chasioti, A; Zabaniotou, A An Industrial Perspective for Sustainable Polypropylene Plastic Waste Management via Catalytic Pyrolysis-A Technical Report(2024)Sustainability, 16.0, 14 | |
| 22504
|
Stallkamp, C; Hennig, M; Volk, R; Stapf, D; Schultmann, F Pyrolysis of mixed engineering plastics: Economic challenges for automotive plastic waste(2024) | |
| 29427
|
Aswan, A; Rusnadi, I; Fatria; Zurohaina; Daniar, R Re-Design Pyrolysis Reactor Prototype for the Conversion of Plastic Waste into Liquid Fuel(2020) | |
| 28723
|
Padmanabhan, S; Giridharan, K; Stalin, B; Kumaran, S; Kavimani, ; Nagaprasad, N; Jule, LT; Krishnaraj, R Energy recovery of waste plastics into diesel fuel with ethanol and ethoxy ethyl acetate additives on circular economy strategy(2022)Scientific Reports, 12.0, 1 | |
| 15010
|
Januszewicz, K; Hunicz, J; Kazimierski, P; Rybak, A; Suchocki, T; Duda, K; Mikulski, M An experimental assessment on a diesel engine powered by blends of waste-plastic-derived pyrolysis oil with diesel(2023) | |
| 13111
|
Das, S; Liang, C; Dunn, JB Plastics to fuel or plastics: Life cycle assessment-based evaluation of different options for pyrolysis at end-of-life(2022) |