| Title | Influence of end-of-life allocation, credits and other methodological issues in LCA of compounds: An in-company circular economy case study on packaging |
|---|---|
| ID_Doc | 17125 |
| Authors | Civancik-Uslu, D; Puig, R; Ferrer, L; Fullana-i-Palmer, P |
| Title | Influence of end-of-life allocation, credits and other methodological issues in LCA of compounds: An in-company circular economy case study on packaging |
| Year | 2019 |
| Published | |
| Abstract | The aim of this article is to present a circular economy case study and investigate and discuss effects of end-of-life (EoL) allocation and crediting strategies on the results of this case study. In the case study, replacement of eucalyptus wood sheets, which are used to separate loaded pallets to prevent damaging each other during top storage in the company, by plastic compound alternatives composed of virgin PP, recycled PP and mineral fillers, is studied. When their life time is over, plastic compound sheets are sent to be recycled in the recycling facilities of the company. While performing this comparative LCA, a methodological discussion on how to credit the system in open-loop (OL) and close-loop (CL) recycling is performed. The use of Q factors (quality factors), instead of 1:1 substitution of virgin materials by recycled ones, is recommended and how to define these Q factors is discussed. The use of Q factors based on the mechanical properties of virgin and recycled materials, which is flexural modulus in this case, is recommended. Finally, a formula for the calculation of the Q factor of the compound material leaving the CL recycling after several recycling cycles, is proposed. Results show that, for this case study, plastic compound sheets are environmentally better alternative than eucalyptus wood sheets for most of the environmental impact categories evaluated due to the following reasons: higher number of uses, lower weight, use of recycled PP and mineral fillers, and longer lifetime. However, in two impact categories (resource depletion water and resource depletion mineral, fossils and renewables) eucalyptus wood sheets are found to have slightly better results. For the rest of the impact categories, the difference in the results are so high that different crediting methods do not affect the results in this case; however, they may in others. Among the scenarios evaluated OL recycling with market mix substitution is found to provide the highest impacts. (C) 2018 Elsevier Ltd. All rights reserved. |
Similar Articles
| ID | Score | Article |
|---|---|---|
4772
|
Huysveld, S; Hubo, S; Ragaert, K; Dewulf, J Advancing circular economy benefit indicators and application on open-loop recycling of mixed and contaminated plastic waste fractions(2019) | |
| 22281
|
Cottafava, D; Costamagna, M; Baricco, M; Corazza, L; Miceli, D; Riccardo, LE Assessment of the environmental break-even point for deposit return systems through an LCA analysis of single-use and reusable cups(2021) | |
| 13006
|
Khan, MMH; Havukainen, J; Niini, A; Leminen, V; Horttanainen, M Consequential life-cycle assessment of treatment options for repulping reject from liquid packaging board waste treatment(2023) | |
| 1303
|
Schwarz, AE; Ligthart, TN; Bizarro, DG; De Wild, PD; Vreugdenhil, B; van Harmelen, TV Plastic recycling in a circular economy; determining environmental performance through an LCA matrix model approach(2021) | |
| 18008
|
Van Fan, Y; Cucek, L; Krajnc, D; Klemes, JJ; Lee, CT Life cycle assessment of plastic packaging recycling embedded with responsibility distribution as driver for environmental mitigation(2023) | |
| 27253
|
Ferrara, C; Scarfato, P; Ferraioli, R; Apicella, A; Incarnato, L; De Feo, G Environmental sustainability assessment of different end-of-life scenarios for the pulper rejects produced in the paper recycling process(2023) | |
| 13181
|
Daigo, I Life Cycle Assessment for Evaluating Materials(2022)Tetsu To Hagane-Journal Of The Iron And Steel Institute Of Japan, 108, 11 | |
| 4615
|
Venkatachalam, V; Pohler, M; Spierling, S; Nickel, L; Barner, L; Endres, HJ Design for Recycling Strategies Based on the Life Cycle Assessment and End of Life Options of Plastics in a Circular Economy(2022)Macromolecular Chemistry And Physics, 223, 13 | |
| 15563
|
Lopez-Aguilar, JF; Sevigne-Itoiz, E; Pena, M; Pena, J A realistic material flow analysis for end-of-life plastic packaging management in Spain: Data gaps and suggestions for improvements towards effective recyclability(2022) | |
| 21573
|
de Souza, HRA; Dantas, TET; Zanghelini, GM; Cherubini, E; Soares, SR Measuring the environmental performance of a circular system: Emergy and LCA approach on a recycle polystyrene system(2020) |