| Title | Catalytic pyrolysis of mechanically non-recyclable waste plastics mixture: Kinetics and pyrolysis in laboratory-scale reactor |
|---|---|
| ID_Doc | 19331 |
| Authors | Kremer, I; Tomic, T; Katancic, Z; Erceg, M; Papuga, S; Vukovic, JP; Schneider, DR |
| Title | Catalytic pyrolysis of mechanically non-recyclable waste plastics mixture: Kinetics and pyrolysis in laboratory-scale reactor |
| Year | 2021 |
| Published | |
| Abstract | Post-consumer waste plastics that cannot be mechanically recycled represent a concerning environmental issue. According to the latest available data for Europe, as much as 25% of collected post-consumer waste plastics are landfilled, 43% is energy recovered, and 32% is recycled. One possible way of recovering non-recyclable plastics is pyrolysis, which is considered environmentally friendly technology for obtaining fuel or chemicals from plastic waste. To tackle the challenge of recovering non-recyclable plastics via pyrolysis, it is necessary to determine their actual composition. Visual separation of collected non-recyclable plastics was performed, and Fouriertransform infrared spectroscopy was used to confirm the accuracy of visual separation. A significant amount of plastics labelled as "other" was found. Since the composition of "other" waste plastics has not been sufficiently investigated, relatively few studies on their pyrolysis have been conducted. Therefore, they were characterised and added to the mixture with other found polymer types of non-recyclable plastics. Thermogravimetric analysis was conducted to determine thermochemical behaviour and kinetic parameters required for laboratory pyrolysis investigation. Kinetic analysis was conducted using the Friedman isoconversional model-free method and nonlinear multivariate regression method. The goal of this paper was to analyse the kinetics, determine the product yield and characteristics of the pyrolysis process of non-recyclable plastics over zeolite catalysts. It was found how the decomposition of non-recyclable plastics occurs in two decomposition steps. The activation energy of non-recyclable plastics was 144 kJ/mol in the first stage of decomposition and 262 kJ/mol in the second stage of decomposition. It decreased by 34% and 6.5% after fresh fluid catalytic cracking catalyst was added and 41% and 18.3% with iron-modified Zeolite Socony Mobil-5 catalyst. The yield of condensate was 55% (wax) for the original sample, and it decreased to 50% (wax and oil) and 27% (mostly oil) with fresh fluid catalytic cracking and iron modified Zeolite Socony Mobil-5 catalysts. Processes with catalysts promoted the formation of olefins and aromatic compounds in pyrolytic oil. All pyrolysis products had a high value of higher heating value ranging from 39 MJ/kg to 43 MJ/kg showing good potential for further energy use. |
Similar Articles
| ID | Score | Article |
|---|---|---|
14085
|
Shan, TL; Wang, KS; Li, Y; Gong, Z; Wang, CS; Tian, XL Study on the kinetics of catalytic pyrolysis of single and mixed waste plastics by spent FCC catalyst(2024)Journal Of Thermal Analysis And Calorimetry, 149, 4 | |
| 10292
|
Soni, VK; Singh, G; Vijayan, BK; Chopra, A; Kapur, GS; Ramakumar, SSV Thermochemical Recycling of Waste Plastics by Pyrolysis: A Review(2021)Energy & Fuels, 35, 16 | |
| 14484
|
Nabgan, W; Ikram, M; Alhassan, M; Owgi, AHK; Tran, TV; Parashuram, L; Nordin, AH; Djellabi, R; Jalil, AA; Medina, F; Nordin, ML Bibliometric analysis and an overview of the application of the non-precious materials for pyrolysis reaction of plastic waste(2023)Arabian Journal Of Chemistry, 16, 6 | |
| 22658
|
Jablonska, B; Poznanska, G; Jablonski, P; Zwolinska, J Thermochemical Valorization of Plastic Waste Containing Low Density Polyethylene, Polyvinyl Chloride and Polyvinyl Butyral into Thermal and Fuel Energy(2024)Energies, 17.0, 14 | |
| 23649
|
Laghezza, M; Fiore, S; Berruti, F A review on the pyrolytic conversion of plastic waste into fuels and chemicals(2024) | |
| 5931
|
Dai, LL; Zhou, N; Lv, YC; Cheng, YL; Wang, YP; Liu, YH; Cobb, K; Chen, PL; Lei, HW; Ruan, RG Pyrolysis technology for plastic waste recycling: A state-of-the-art review(2022) | |
| 12454
|
Peng, YJ; Wang, YP; Ke, LY; Dai, LL; Wu, QH; Cobb, K; Zeng, Y; Zou, RG; Liu, YH; Ruan, RG A review on catalytic pyrolysis of plastic wastes to high-value products(2022) | |
| 69576
|
Hussain, I; Ganiyu, SA; Alasiri, H; Alhooshani, K A state-of-the-art review on waste plastics-derived aviation fuel: Unveiling the heterogeneous catalytic systems and techno-economy feasibility of catalytic pyrolysis(2022) | |
| 15168
|
Shaker, M; Kumar, V; Saffron, CM; Rabnawaz, M Revolutionizing Plastics Chemical Recycling with Table Salt(2024)Advanced Sustainable Systems, 8, 1 | |
| 26791
|
Cuevas, AB; Leiva-Candia, DE; Dorado, MP An Overview of Pyrolysis as Waste Treatment to Produce Eco-Energy(2024)Energies, 17, 12 |