Knowledge Agora



Similar Articles

Title On Fractioning the Tire Pyrolysis Oil in a Pilot-Scale Distillation Plant under Industrially Relevant Conditions
ID_Doc 19748
Authors Martínez, JD; Veses, A; Callén, MS; López, JM; García, T; Murillo, R
Title On Fractioning the Tire Pyrolysis Oil in a Pilot-Scale Distillation Plant under Industrially Relevant Conditions
Year 2023
Published
Abstract Tire pyrolysis oil (TPO) is one of the most interesting products derived from the pyrolysis of end-of-life tires. Among others, it contains valuable chemicals, such as benzene, toluene, ethylbenzene, and xylene (BTEX), as well as limonene. In order to recover these chemicals, a pilot-scale distillation plant has been designed, erected, and operated using TPO derived from an industrial-scale pyrolysis plant. The distillation facility consists of a packed column (20 kg/h) and is within the fifth technological readiness level. This work describes for the first time the fractioning of the TPO in a continuous operational mode under industrially relevant conditions. For this purpose, different reboiler temperatures (250-290 degrees C) and reflux ratios (up to 2.4) were preliminarily assessed on the yields and properties of the resulting products: light fraction (LF) and heavy fraction (HF). Thus, the distillation plant is capable of producing 27.0-36.7 and 63.3-73.0 wt % of LF and HF, respectively. The highest BTEX concentration in the LF (55.2 wt %) was found using a reboiler temperature of 250 degrees C and a reflux ratio of 2.4. Contrarily, the highest limonene concentration (4.9 wt %) in the LF was obtained at 290 degrees C in the reboiler without reflux. In this sense, the lower the reboiler temperature, the higher the BTEX, and the lower the limonene concentration in the LF. The main results herein obtained serve to gain key insights to operate packed distillation columns using complex and promising hydrocarbons as TPO in order to recover valuable products. In addition, this work provides significant information for optimizing the recovery efficiencies of both BTEX and limonene, as well as their potential applications including that for the resulting HF.
PDF https://doi.org/10.1021/acs.energyfuels.2c03850

Similar Articles

ID Score Article
17029 Martínez, JD; Sanchís, A; Veses, A; Callén, MS; López, JM; García, T; Murillo, R Design and operation of a packed pilot scale distillation column for tire pyrolysis oil: Towards the recovery of value-added raw materials(2024)
6299 Campuzano, F; Martínez, JD; Santamaría, AFA; Sarathy, SM; Roberts, WL Pursuing the End-of-Life Tire Circularity: An Outlook toward the Production of Secondary Raw Materials from Tire Pyrolysis Oil(2023)Energy & Fuels, 37, 13
14817 González-Pernas, FM; Moreno, I; Serrano, DP; Pizarro, P Enhanced monoaromatic hydrocarbons production via pressurized catalytic pyrolysis of end-of-life tires(2024)
19798 Veses, A; Martínez, JD; Sanchís, A; López, JM; García, T; García, G; Murillo, R Pyrolysis of End-Of-Life Tires: Moving from a Pilot Prototype to a Semi-Industrial Plant Using Auger Technology(2024)Energy & Fuels, 38.0, 17
16587 Sanchis, A; Veses, A; Martinez, JD; Lopez, JM; Garcia, T; Murillo, R The role of temperature profile during the pyrolysis of end-of-life-tyres in an industrially relevant conditions auger plant(2022)
20800 Al-Salem, SM Valorisation of End of Life Tyres (ELTs) in a Newly Developed Pyrolysis Fixed-Bed Batch Process(2020)
15386 Mikulski, M; Ambrosewicz-Walacik, M; Hunicz, J; Nitkiewicz, S Combustion engine applications of waste tyre pyrolytic oil(2021)
14828 Santos, E; Rijo, B; Lemos, F; Lemos, MANDA A catalytic reactive distillation approach to high density polyethylene pyrolysis - Part 1-Light olefin production(2019)
Scroll