| Title | The Design and Development of Recycled Concretes in a Circular Economy Using Mixed Construction and Demolition Waste |
|---|---|
| ID_Doc | 21262 |
| Authors | González, MD; Caballero, PP; Fernández, DB; Vidal, MMJ; del Bosque, IFS; Martínez, CM |
| Title | The Design and Development of Recycled Concretes in a Circular Economy Using Mixed Construction and Demolition Waste |
| Year | 2021 |
| Published | Materials, 14.0, 16 |
| Abstract | This research study analysed the effect of adding fine-fMRA (0.25% and 50%)-and coarse-cMRA (0%, 25% and 50%)-mixed recycled aggregate both individually and simultaneously in the development of sustainable recycled concretes that require a lower consumption of natural resources. For this purpose, we first conducted a physical and mechanical characterisation of the new recycled raw materials and then analysed the effect of its addition on fresh and hardened new concretes. The results highlight that the addition of fMRA and/or cMRA does not cause a loss of workability in the new concrete but does increase the amount of entrained air. Regarding compressive strength, we observed that fMRA and/or cMRA cause a maximum increase of +12.4% compared with conventional concrete. Tensile strength increases with the addition of fMRA (between 8.7% and 5.5%) and decreases with the use of either cMRA or fMRA + cMRA (between 4.6% and 7%). The addition of fMRA mitigates the adverse effect that using cMRA has on tensile strength. Regarding watertightness, all designed concretes have a structure that is impermeable to water. Lastly, the results show the feasibility of using these concretes to design elements with a characteristic strength of 25 MPa and that the optimal percentage of fMRA replacement is 25%. |
| https://www.mdpi.com/1996-1944/14/16/4762/pdf?version=1629722158 |
Similar Articles
| ID | Score | Article |
|---|---|---|
8719
|
Le, HB; Bui, QB Recycled aggregate concretes - A state-of-the-art from the microstructure to the structural performance(2020) | |
| 14338
|
Joseph, HS; Pachiappan, T; Avudaiappan, S; Flores, EIS A Study on Mechanical and Microstructural Characteristics of Concrete Using Recycled Aggregate(2022)Materials, 15, 21 | |
| 9188
|
Jesus, S; Pederneiras, CM; Farinha, CB; de Brito, J; Veiga, R Reduction of the Cement Content by Incorporation of Fine Recycled Aggregates from Construction and Demolition Waste in Rendering Mortars(2021)Infrastructures, 6.0, 1 | |
| 19945
|
Cantero, B; del Bosque, IFS; de Rojas, MIS; Matías, A; Medina, C Durability of concretes bearing construction and demolition waste as cement and coarse aggregate substitutes(2022) | |
| 19502
|
Cantero, B; del Bosque, IFS; Matías, A; Medina, C Statistically significant effects of mixed recycled aggregate on the physical-mechanical properties of structural concretes(2018) | |
| 6506
|
Velardo, P; del Bosque, IFS; Matías, A; de Rojas, MIS; Medina, C Properties of concretes bearing mixed recycled aggregate with poly mermodified surfaces(2021) | |
| 9378
|
Elsheikh, A; Al-Zayadi, SK; Albo-Hassan, AS Experimental investigation of concrete incorporating recycled concrete aggregates(2024)Innovative Infrastructure Solutions, 9.0, 6 | |
| 13118
|
Letelier, V; Bustamante, M; Muñoz, P; Rivas, S; Ortega, JM Evaluation of mortars with combined use of fine recycled aggregates and waste crumb rubber(2021) | |
| 4001
|
Cerchione, R; Colangelo, F; Farina, I; Ghisellini, P; Passaro, R; Ulgiati, S Life Cycle Assessment of Concrete Production within a Circular Economy Perspective(2023)Sustainability, 15, 14 | |
| 6276
|
Juan-Valdés, A; Rodríguez-Robles, D; García-González, J; Gómez, MISD; Guerra-Romero, MI; De Belie, N; Morán-del Pozo, JM Mechanical and microstructural properties of recycled concretes mixed with ceramic recycled cement and secondary recycled aggregates. A viable option for future concrete(2021) |