| Title | Fabrication and Characterisation of Sustainable 3D-Printed Parts Using Post-Consumer PLA Plastic and Virgin PLA Blends |
|---|---|
| ID_Doc | 22353 |
| Authors | Hasan, MR; Davies, IJ; Paramanik, A; John, M; Biswas, WK |
| Title | Fabrication and Characterisation of Sustainable 3D-Printed Parts Using Post-Consumer PLA Plastic and Virgin PLA Blends |
| Year | 2024 |
| Published | Processes, 12.0, 4 |
| Abstract | Sustainable manufacturing practices are becoming increasingly necessary due to the growing concerns regarding climate change and resource scarcity. Consequently, material recycling technologies have gradually become preferred over conventional processes. This study aimed to recycle waste polylactic acid (PLA) from household-disposed cups and lids to create 3D-printed parts and promote sustainable manufacturing practices. To achieve this, the current study utilised virgin and post-consumer PLA (PC-PLA) (sourced from household waste) blends. The PC-PLA wastes were shredded and sorted by size with the aid of a washing step, resulting in a filament with a 1.70 +/- 0.5 mm diameter without fragmentation or dissolution. A 50:50 wt.% blend of virgin PLA (vPLA) and PC-PLA was selected as the standard recycling percentage based on previous research and resource conservation goals. The study investigated the impact of three 3D printing parameters (layer height (LH), infill density (I), and nozzle temperature (NT)) on the quality of 3D-printed parts using a three-level L9 Taguchi orthogonal array. The findings revealed that blending PC-PLA with vPLA led to significant improvements in tensile, flexural, and impact strengths by 18.40%, 8%, and 9.15%, respectively, compared to those of recycled PLA (rPLA). This conclusion was supported by the investigation of the fracture surface area, which revealed fractographic features associated with printing parameters, such as plastic deformation and interfilament debonding. An ANOVA analysis revealed a positive influence of a greater layer height and high nozzle temperature on mechanical properties. Subsequently, the optimal printing parameters (LH: 0.3 mm, I: 100%, and NT: 215 degrees C) were determined using the S/N ratio, and a confirmation test using the optimum printing parameters exhibited a strong correlation with the statistically predicted outcomes. Finally, the study used optimum printing parameters to fabricate 100% PC-PLA 3D-printed parts, demonstrating their potential for low-strength applications. The findings suggest that employing vPLA and PC-PLA blended filaments for fabricating 3D-printed components presents an effective means of promoting plastic recycling within a closed-loop recycling system and achieving a circular economy. |
| https://www.mdpi.com/2227-9717/12/4/760/pdf?version=1712668295 |
Similar Articles
| ID | Score | Article |
|---|---|---|
13228
|
Agbakoba, VC; Webb, N; Jegede, E; Phillips, R; Hlangothi, SP; John, MJ Mechanical Recycling of Waste PLA Generated From 3D Printing Activities: Filament Production and Thermomechanical Analysis(2024)Macromolecular Materials And Engineering, 309, 8 | |
| 27849
|
Fico, D; Rizzo, D; De Carolis, V; Montagna, F; Corcione, CE Sustainable Polymer Composites Manufacturing through 3D Printing Technologies by Using Recycled Polymer and Filler(2022)Polymers, 14.0, 18 | |
| 18891
|
López, VM; Carou, D; Cruz, FA Feasibility study on the use of recycled materials for prototyping purposes: A comparative study based on the tensile strength(2023)Proceedings Of The Institution Of Mechanical Engineers Part B-Journal Of Engineering Manufacture, 237.0, 5 | |
| 18438
|
Castanon-Jano, L; Palomera-Obregon, P; Lazaro, M; Blanco-Fernandez, E; Blasón, S Enhancing sustainability in polymer 3D printing via fusion filament fabrication through integration of by-products in powder form: mechanical and thermal characterization(2024)International Journal Of Advanced Manufacturing Technology, 133.0, 3-4 | |
| 14680
|
Jayawardane, H; Davies, IJ; Gamage, JR; John, M; Biswas, WK Additive manufacturing of recycled plastics: a 'techno-eco-efficiency' assessment(2023)International Journal Of Advanced Manufacturing Technology, 126, 3-4 | |
| 14079
|
Alexandre, A; Sanchez, FCA; Boudaoud, H; Camargo, M; Pearce, JM Mechanical Properties of Direct Waste Printing of Polylactic Acid with Universal Pellets Extruder: Comparison to Fused Filament Fabrication on Open-Source Desktop Three-Dimensional Printers(2020)3D Printing And Additive Manufacturing, 7, 5 | |
| 28570
|
Simon, Z; Stojcevski, F; Dharmasiri, B; Henderson, LC; Amini, N Circular economy-driven additive manufacturing: A model for recycling PLA/copper composites through multi-extrusion processing(2024) | |
| 24120
|
Romani, A; Perusin, L; Ciurnelli, M; Levi, M Characterization of PLA feedstock after multiple recycling processes for large-format material extrusion additive manufacturing(2024) | |
| 18506
|
Nagengast, N; Bay, C; Döpper, F; Schmidt, HW; Neuber, C Thermo-Mechanical Recyclability of Additively Manufactured Polypropylene and Polylactic Acid Parts and Polypropylene Support Structures(2023)Polymers, 15.0, 10 | |
| 26493
|
Dash, A; Kabra, S; Misra, S; Hrishikeshan, G; Singh, RP; Patterson, AE; Chadha, U; Rajan, AJ; Hirpha, BB Comparative property analysis of fused filament fabrication PLA using fresh and recycled feedstocks(2022)Materials Research Express, 9, 11 |