| Title | Catalytic bi-reforming of methane for carbon dioxide ennoblement |
|---|---|
| ID_Doc | 23697 |
| Authors | Cunha, AF; Mata, TM; Caetano, NS; Martins, AA; Loureiro, JM |
| Title | Catalytic bi-reforming of methane for carbon dioxide ennoblement |
| Year | 2020 |
| Published | |
| Abstract | New processes that may reduce the net carbon emissions and contribute to a more circular economy are needed. Bi-reforming of methane (BRM) is a promising method for syngas production, with a hydrogen-to-carbon monoxide ratio of two in the reaction products, relevant for example when the purpose is methanol synthesis. In this work, reaction studies were carried out over a nickel-based catalyst varying the temperature (798-1123 K). Three main temperature zones have been identified; a low temperature zone where the conversion of carbon dioxide is almost null, a middle temperature range where steam reforming of methane (SRM) is dominant while the conversion of carbon dioxide via dry reforming of methane (DRM) is low, and finally a high temperature range where DRM becomes more significant. The results show that syngas can be successfully produced using this process. For the range of operating conditions studied, the carbon dioxide and methane conversions increase with temperature, reaching 40% and 100%, respectively at the largest temperature studied. However, the production of syngas in a molar ratio of 1:2 for CO-to-H-2 requires the use of high temperatures. Most probably the nickel agglomerates on top of the gamma-alumina support are responsible for the poor catalyst performance. (C) 2019 Published by Elsevier Ltd. |
| https://doi.org/10.1016/j.egyr.2019.08.022 |
Similar Articles
| ID | Score | Article |
|---|---|---|
7954
|
Yentekakis, IV; Panagiotopoulou, P; Artemakis, G A review of recent efforts to promote dry reforming of methane (DRM) to syngas production via bimetallic catalyst formulations(2021) | |
| 10201
|
Longo, A; Theofanidis, SA; Poelman, H; Banerjee, D; Marin, GB; Galvita, VV Trimetallic Catalyst Configuration for Syngas Production(2022)Chemcatchem, 14, 5 | |
| 19949
|
Tommasi, M; Degerli, SN; Ramis, G; Rossetti, I Advancements in CO2 methanation: A comprehensive review of catalysis, reactor design and process optimization(2024) | |
| 26578
|
González-Arias, J; Torres-Sempere, G; Villora-Picó, JJ; Reina, TR; Odriozola, JA Synthetic natural gas production using CO2-rich waste stream from hydrothermal carbonization of biomass: Effect of impurities on the catalytic activity(2024) | |
| 19614
|
Centi, G; Perathoner, S Chemistry and energy beyond fossil fuels. A perspective view on the role of syngas from waste sources(2020) | |
| 29518
|
Wang, C; Sourav, S; Yu, KW; Kwak, Y; Zheng, WQ; Vlachos, DG Green Syngas Production by Microwave-Assisted Dry Reforming of Methane on Doped Ceria Catalysts(2023)Acs Sustainable Chemistry & Engineering, 11.0, 36 | |
| 12231
|
Frainetti, AJ; Klinghoffer, NB Engineering biochar-supported nickel catalysts for efficient CO2 methanation(2024) | |
| 9340
|
Nisamaneenate, J; Idris, IA; Tocharoen, S; Atong, D; Sricharoenchaikul, V Circular fuel production through steam reforming of waxy crude sludge: Enhancing syngas production using transition bimetallic catalyst(2024) | |
| 24861
|
Yusuf, N; Almomani, F; Qiblawey, H Catalytic CO2 conversion to C1 value-added products: Review on latest catalytic and process developments(2023) | |
| 25373
|
Mahabir, J; Bhagaloo, K; Koylass, N; Boodoo, MN; Ali, R; Guo, M; Ward, K What is required for resource-circular CO2 utilization within Mega-Methanol (MM) production?(2021) |