| Title | Solubility/Insolubility: A Possible Option for Recycling Polystyrene |
|---|---|
| ID_Doc | 23864 |
| Authors | García, AIH; Alejandro-Hernández, S; Cuevas-Carballo, ZB; Galaviz-Pérez, JA; Vázquez-Rodríguez, JM; Guerrero-Zárate, D |
| Title | Solubility/Insolubility: A Possible Option for Recycling Polystyrene |
| Year | 2024 |
| Published | Applied Sciences-Basel, 14, 17 |
| Abstract | Featured Application Polystyrene recycling.Abstract This work proposes a conceptual design for recovering polystyrene (PS) using solvents of agro-industrial origin. The literature describes the dilution of expanded polystyrene (EPS) in limonene, followed by its insolubilization with alcohols for recovery. However, there is no information on the solubility limit for the PS + limonene + alcohol system, which is critical for the process design. To determine the solubility limit, we diluted the waste EPS in D-limonene, mixed it with ethanol to form a precipitate, and used a gravimetric method to measure the mass of the compounds. These results allowed for the conceptual design of an EPS recycling process using a chemical process simulator, which includes a separator, a distillation column, and auxiliary equipment such as heaters, coolers, and pumps. An empirical correlation was obtained for the solubility limit, which enabled the design of a process for the treatment of 52 kg/s of PS using 0.75 kg/s of ethanol and 2.4 kg/s of D-limonene once the stationary state had been reached. The distillation column is six-stage, with a reflux ratio of 1.5 and duties of 30,000 and -25 847 kW for the condenser and reboiler, respectively. |
| https://doi.org/10.3390/app14177950 |
Similar Articles
| ID | Score | Article |
|---|---|---|
17436
|
Pin, JM; Soltani, I; Negrier, K; Lee, PC Recyclability of Post-Consumer Polystyrene at Pilot Scale: Comparison of Mechanical and Solvent-Based Recycling Approaches(2023)Polymers, 15, 24 | |
| 17823
|
Musivand, S; Bracciale, MP; Damizia, M; De Filippis, P; de Caprariis, B Viable Recycling of Polystyrene via Hydrothermal Liquefaction and Pyrolysis(2023)Energies, 16, 13 | |
| 22545
|
Tsampanakis, I; White, AO The Mechanics of Forming Ideal Polymer-Solvent Combinations for Open-Loop Chemical Recycling of Solvents and Plastics(2022)Polymers, 14.0, 1 | |
| 10188
|
Mumbach, GD; Bolzan, A; Machado, RAF A closed-loop process design for recycling expanded polystyrene waste by dissolution and polymerization(2020) | |
| 12468
|
Reed, MR; Belden, ER; Kazantzis, NK; Timko, MT; Castro-Dominguez, B Thermodynamic and economic analysis of a deployable and scalable process to recover Monomer-Grade styrene from waste polystyrene(2024) | |
| 25851
|
Baena-González, J; Santamaria-Echart, A; Aguirre, JL; González, S Chemical recycling of plastic waste: Bitumen, solvents, and polystyrene from pyrolysis oil(2020) | |
| 14618
|
Ramírez-Martínez, M; Aristizábal, SL; Szekely, G; Nunes, SP Bio-based solvents for polyolefin dissolution and membrane fabrication: from plastic waste to value-added materials(2023)Green Chemistry, 25, 3 |