| Title | Platinum Recovery from Industrial Process Solutions by Electrodeposition-Redox Replacement |
|---|---|
| ID_Doc | 25662 |
| Authors | Halli, P; Heikkinen, JJ; Elomaa, H; Wilson, BP; Jokinen, V; Yliniemi, K; Franssila, S; Lundström, M |
| Title | Platinum Recovery from Industrial Process Solutions by Electrodeposition-Redox Replacement |
| Year | 2018 |
| Published | Acs Sustainable Chemistry & Engineering, 6, 11 |
| Abstract | In the current study, platinum-present as a negligible component (below 1 ppb, the detection limit of the HR-ICP-MS at the dilutions used) in real industrial hydrometallurgical process solutions-was recovered by an electrodeposition-redox replacement (EDRR) method on pyrolyzed carbon (PyC) electrode, a method not earlier applied to metal recovery. The recovery parameters of the EDRR process were initially investigated using a synthetic nickel electrolyte solution ([Ni] = 60 g/L, [Ag] = 10 ppm, [Pt] = 20 ppm, [H2SO4] = 10 g/L), and the results demonstrated an extraordinary increase of 3 x 10(5) in the [Pt]/[Ni] on the electrode surface cf. synthetic solution. EDRR recovery of platinum on PyC was also tested with two real industrial process solutions that contained a complex multimetal solution matrix: Ni as the major component (>140 g/L) and very low contents of Pt, Pd, and Ag (i.e., <1 ppb, 117 and 4 ppb, respectively). The selectivity of Pt recovery by EDRR on the PyC electrode was found to be significant-nanoparticles deposited on the electrode surface comprised on average of 90 wt % platinum and a [Pt]/[Ni] enrichment ratio of 10(11) compared to the industrial hydrometallurgical solution. Furthermore, other precious metallic elements like Pd and Ag could also be enriched on the PyC electrode surface using the same methodology. This paper demonstrates a remarkable advancement in the recovery of trace amounts of platinum from real industrial solutions that are not currently considered as a source of Pt metal. |
| https://pubs.acs.org/doi/pdf/10.1021/acssuschemeng.8b03224 |
Similar Articles
| ID | Score | Article |
|---|---|---|
11079
|
Sadeghi, SM; Soares, HMVM A sustainable hydrometallurgical strategy for recycling efficiently platinum from spent reforming petroleum catalyst(2023)Environmental Science And Pollution Research, 30, 45 | |
| 15732
|
Billy, E; Dufaud, V; Coudray, M; Mendil-Jakani, H; Haumesser, PH; Santini, CC Direct Extraction of Platinum Nanoparticles from Fuel Cells with Ionic Liquids: Part 1. Implementation and Optimization of the Process Parameters(2023)Industrial & Engineering Chemistry Research, 62, 16 | |
| 8990
|
Yakoumis, I; Panou, M; Moschovi, AM; Panias, D Recovery of platinum group metals from spent automotive catalysts: A review(2021) | |
| 19536
|
Korolev, I; Spathariotis, S; Yliniemi, K; Wilson, BP; Abbott, AP; Lundström, M Mechanism of selective gold extraction from multi-metal chloride solutions by electrodeposition-redox replacement(2020)Green Chemistry, 22.0, 11 | |
| 15679
|
Hosseinzadeh, M; Petersen, J Recovery of Pt, Pd, and Rh from spent automotive catalysts through combined chloride leaching and ion exchange: A review(2024) |