| Title | Oil from plastic via hydrothermal liquefaction: Production and characterization |
|---|---|
| ID_Doc | 25865 |
| Authors | Seshasayee, MS; Savage, PE |
| Title | Oil from plastic via hydrothermal liquefaction: Production and characterization |
| Year | 2020 |
| Published | |
| Abstract | We determined the effect of batch holding time (0.5 h, 1 h) and temperature (350-450 degrees C) on the yield, composition, and quality of oil formed from the hydrothermal treatment of polypropylene (PP), polystyrene (PS), polycarbonate (PC), and polyethylene terephthalate (PET). The highest oil yields for each material ranged from just 16 wt% for PET to 86 wt% for polystyrene. The depolymerization of plastics to produce oil occurs fastest in the supercritical water regime (T > 400 degrees C). The higher heating value (HHV) of the oil from PP and PS (44-45 MJ/kg) is comparable to that of gasoline (HHV similar to 43.4 MJ/kg). The oil from PC and PET had lower heating values but further treatment to remove oxygen atoms would increase the energy density. Increasing the hydrothermal reaction severity (longer times, higher supercritical temperatures) reduces oil yields but increases heating values. Increasing temperature causes more aromatization in the oil from PP and PS and promotes dehydration reactions during hydrothermal treatment of PET and PC. The oil from PC contained bisphenol-A as a major product. Obtaining such monomers from hydrothermal treatment would provide a revenue stream in addition to oil and thereby improve the process economics. |
Similar Articles
| ID | Score | Article |
|---|---|---|
24407
|
dos Passos, JS; Glasius, M; Biller, P Screening of common synthetic polymers for depolymerization by subcritical hydrothermal liquefaction(2020) | |
| 17187
|
Colnik, M; Kotnik, P; Knez, Z; Skerget, M Chemical Recycling of Polyolefins Waste Materials Using Supercritical Water(2022)Polymers, 14, 20 | |
| 6720
|
Seshasayee, MS; Savage, PE Synergistic interactions during hydrothermal liquefaction of plastics and biomolecules(2021) | |
| 19254
|
Jangid, CJ; Miller, KM; Seay, JR Analysis of Plastic-Derived Fuel Oil Produced from High- and Low-Density Polyethylene(2022)Recycling, 7.0, 3 | |
| 13476
|
Chang, SH Plastic waste as pyrolysis feedstock for plastic oil production: A review(2023) | |
| 8744
|
Palmay, P; Haro, C; Huacho, I; Barzallo, D; Bruno, JC Production and Analysis of the Physicochemical Properties of the Pyrolytic Oil Obtained from Pyrolysis of Different Thermoplastics and Plastic Mixtures(2022)Molecules, 27.0, 10 | |
| 17825
|
Irgolic, M; Colnik, M; Kotnik, P; Cucek, L; Skerget, M Hydrothermal recycling of polyolefins as potential alternative method for fuel production(2024) | |
| 18522
|
Hernández, B; Kots, P; Selvam, E; Vlachos, DG; Ierapetritou, MG Techno-Economic and Life Cycle Analyses of Thermochemical Upcycling Technologies of Low-Density Polyethylene Waste(2023)Acs Sustainable Chemistry & Engineering, 11.0, 18 | |
| 17823
|
Musivand, S; Bracciale, MP; Damizia, M; De Filippis, P; de Caprariis, B Viable Recycling of Polystyrene via Hydrothermal Liquefaction and Pyrolysis(2023)Energies, 16, 13 | |
| 15283
|
Mangesh, VL; Tamizhdurai, P; Krishnan, PS; Narayanan, S; Umasankar, S; Padmanabhan, S; Shanthi, K Green energy: Hydroprocessing waste polypropylene to produce transport fuel(2020) |