| Title | Improving circular economy by the valorization of non-conventional coal fly ashes in composite cement manufacturing |
|---|---|
| ID_Doc | 27823 |
| Authors | Sow, M; Hot, J; Tribout, C; Cyr, M |
| Title | Improving circular economy by the valorization of non-conventional coal fly ashes in composite cement manufacturing |
| Year | 2021 |
| Published | |
| Abstract | Spreader Stoker thermal power plants are initially used to burn bagasse during the sugarcane harvest, but also coal when the season is over. The drawback is that, compared to standard pulverized coal fly ashes, the coal fly ashes resulting from this process contain many more unburned particles. Therefore, Spreader Stoker Coal Fly Ash (SSCFA) is sent to landfill despite its potential for valorisation in construction. The main objective of this work was to evaluate the potential of laboratory manufactured composite cements incorporating SSCFA by using a variety of manufacturing methods, such as co-grinding/separate grinding of the components, and grinding of laboratory cements to equivalent global fineness. The behaviour in the fresh, hardening and hardened states was investigated to bring out the influence of Blaine specific surface and type of addition in different combinations of composite cements. Despite the high carbon content of the coal fly ash studied, the mechanical behaviour of SSCFA-cements was better than that of cement with the local pozzolan, which is the reference in Reunion Island. In addition, the use of slag and the pozzolan/SSCFA association in composite cements showed good results. An artificial neural network approach was employed to predict compressive strength in mortars with parameters such as amounts of clinker, gypsum, pozzolana, SSCFA and slag, and the Blaine specific surface. The results also enabled compressive strength response curves to be developed for mixes according to the amount of clinker in the cements. (c) 2021 Elsevier Ltd. All rights reserved. |
| http://manuscript.elsevier.com/S0950061821018134/pdf/S0950061821018134.pdf |
Similar Articles
| ID | Score | Article |
|---|---|---|
13661
|
Fort, J; Sál, J; Sevcík, R; Dolezelová, M; Keppert, M; Jerman, M; Záleská, M; Stehel, V; Cerny, R Biomass fly ash as an alternative to coal fly ash in blended cements: Functional aspects(2021) | |
| 3238
|
Morales, LF; Herrera, K; López, JE; Aguado, R; Saldarriaga, JF Circular economy strategy for the valorization of fly ash as a substitute for cement in monoliths (resistance and reactivity evaluation)(2024)Environmental Progress & Sustainable Energy, 43, 3 | |
| 29318
|
Menéndez, E; Argiz, C; Recino, H; Sanjuán, MA Characterization of Mortars Made with Coal Ashes Identified as a Way Forward to Mitigate Climate Change(2022)Crystals, 12.0, 4 | |
| 15020
|
Sivakumar, S; Prakash, R; Srividhya, S; Vikram, ASV A novel analytical evaluation of the laboratory-measured mechanical properties of lightweight concrete(2023)Structural Engineering And Mechanics, 87, 3 | |
| 8172
|
Modolo, RCE; Senff, L; Ferreira, VM; Tarelho, LAC; Moraes, CAM Fly ash from biomass combustion as replacement raw material and its influence on the mortars durability(2018)Journal Of Material Cycles And Waste Management, 20.0, 2 | |
| 14086
|
Sargent, P; Sandanayake, M; Law, DW; Hughes, DJ; Shifa, F; Borthwick, B; Scott, P Strength, mineralogical, microstructural and CO2 emission assessment of waste mortars comprising excavated soil, scallop shells and blast furnace slag(2024) | |
| 7670
|
Górak, P; Postawa, P; Trusilewicz, LN; Lagosz, A Lightweight PET based composite aggregates in Portland cement materials - Microstructure and physicochemical performance(2021) | |
| 22867
|
Machowska, A The Properties Of Mass Concrete With Cfbc Fly Ash-Slag Binder(2020)Archives Of Civil Engineering, 66.0, 4 | |
| 22164
|
Vasile, BS; Nicoara, AI; Surdu, VA; Ene, VL; Neacsu, IA; Stoica, AE; Oprea, O; Boerasu, I; Trusca, R; Vrabec, M; Miklavic, B; Sturm, S; Ow-Yang, C; Gulgun, MA; Bundur, ZB Fly-Ash Evaluation as Potential EOL Material Replacement of Cement in Pastes: Morpho-Structural and Physico-Chemical Properties Assessment(2022)Materials, 15.0, 9 | |
| 22965
|
de Sande, VT; Sadique, M; Pineda, P; Bras, A; Atherton, W; Riley, M Potential use of sugar cane bagasse ash as sand replacement for durable concrete(2021) |