| Title | Thermal stabilization of recycled PLA for 3D printing by addition of charcoal |
|---|---|
| ID_Doc | 28035 |
| Authors | Fico, D; Corcione, CE; Acocella, MR; Rizzo, D; De Carolis, V; Maffezzoli, A |
| Title | Thermal stabilization of recycled PLA for 3D printing by addition of charcoal |
| Year | 2023 |
| Published | Journal Of Thermal Analysis And Calorimetry, 148.0, 23 |
| Abstract | Poly(lactic acid) (PLA) is one of the most widely used thermoplastic materials for 3D printing, particularly in the Fused Filament Fabrication technique. However, the printing process generates waste products and even though PLA is compostable, the possibility of recycling it provides ecological and economical benefits. In this work, a study on the stabilization of recycled PLA using charcoal (CC) was carried out, with the aim of overcoming the well-known problem of degradation (reduction in molecular weight) of PLA, during remelting. Microscopic investigations showed good dispersion of the filler in the polymer matrix, as well as better adhesion between the printed layers. Thermal analyses (Differential scanning calorimetry and thermogravimetry) indicate a stabilization of PLA waste because of the addition of small concentrations of CC to the recycled polymer matrix. These data are confirmed by GPC analyses, which show that the addition of filler is associated with higher molecular weight. Mechanical analysis indicated improved elongation at break and elasticity. Finally, a key ring was printed as an example of the better printability of the filament containing CC. The results indicate that a stabilization of the recycled PLA with a very low concentration of CC has been achieved. Improved 3D printability and properties of the 3D printed objects can be attained through recycling and recovery of wasted PLA, according to sustainability and circular economy matters. |
| https://link.springer.com/content/pdf/10.1007/s10973-023-12525-2.pdf |
Similar Articles
| ID | Score | Article |
|---|---|---|
13228
|
Agbakoba, VC; Webb, N; Jegede, E; Phillips, R; Hlangothi, SP; John, MJ Mechanical Recycling of Waste PLA Generated From 3D Printing Activities: Filament Production and Thermomechanical Analysis(2024)Macromolecular Materials And Engineering, 309, 8 | |
| 22353
|
Hasan, MR; Davies, IJ; Paramanik, A; John, M; Biswas, WK Fabrication and Characterisation of Sustainable 3D-Printed Parts Using Post-Consumer PLA Plastic and Virgin PLA Blends(2024)Processes, 12.0, 4 | |
| 27849
|
Fico, D; Rizzo, D; De Carolis, V; Montagna, F; Corcione, CE Sustainable Polymer Composites Manufacturing through 3D Printing Technologies by Using Recycled Polymer and Filler(2022)Polymers, 14.0, 18 | |
| 6454
|
Liu, HD; Gong, K; Portela, A; Chyzna, V; Yan, GM; Cao, Z; Dunbar, R; Chen, YY Investigation of distributed recycling of polylactic acid over multiple generations via the granule-based material extrusion process(2024) | |
| 24120
|
Romani, A; Perusin, L; Ciurnelli, M; Levi, M Characterization of PLA feedstock after multiple recycling processes for large-format material extrusion additive manufacturing(2024) | |
| 7609
|
Belioka, MP; Markozanne, G; Chrissopoulou, K; Achilias, DS Advanced Plastic Waste Recycling-The Effect of Clay on the Morphological and Thermal Behavior of Recycled PET/PLA Sustainable Blends(2023)Polymers, 15, 14 | |
| 26493
|
Dash, A; Kabra, S; Misra, S; Hrishikeshan, G; Singh, RP; Patterson, AE; Chadha, U; Rajan, AJ; Hirpha, BB Comparative property analysis of fused filament fabrication PLA using fresh and recycled feedstocks(2022)Materials Research Express, 9, 11 | |
| 14079
|
Alexandre, A; Sanchez, FCA; Boudaoud, H; Camargo, M; Pearce, JM Mechanical Properties of Direct Waste Printing of Polylactic Acid with Universal Pellets Extruder: Comparison to Fused Filament Fabrication on Open-Source Desktop Three-Dimensional Printers(2020)3D Printing And Additive Manufacturing, 7, 5 | |
| 18891
|
López, VM; Carou, D; Cruz, FA Feasibility study on the use of recycled materials for prototyping purposes: A comparative study based on the tensile strength(2023)Proceedings Of The Institution Of Mechanical Engineers Part B-Journal Of Engineering Manufacture, 237.0, 5 | |
| 19428
|
Mikula, K; Skrzypczak, D; Izydorczyk, G; Warchol, J; Moustakas, K; Chojnacka, K; Witek-Krowiak, A 3D printing filament as a second life of waste plastics-a review(2021)Environmental Science And Pollution Research, 28.0, 10 |