| Title | Valorization of Post-Consumers Plastics and Agro-Waste in Sustainable Polymeric Composites for Tribological Applications |
|---|---|
| ID_Doc | 6019 |
| Authors | Soni, A; Das, PK; Yusuf, M; Ridha, S; Kamyab, H; Chelliapan, S; Kirpichnikova, I; Mussa, ZH |
| Title | Valorization of Post-Consumers Plastics and Agro-Waste in Sustainable Polymeric Composites for Tribological Applications |
| Year | 2024 |
| Published | Waste And Biomass Valorization, 15, 3 |
| Abstract | The research proposed an effective approach for recycling of waste plastics and agro-industrial waste as a source of energy optimizing the economic viability of the waste products and reducing environmental issues. The composites were developed by utilizing eight different types of waste plastics, rice hush husk, and sand. The density, water absorption, compressive strength, and flexural strength of the composites were evaluated. Moreover, the tribological characterizations as sliding wear rate and three-body abrasive wear were performed under the conditions of loads and speeds. The composites attained a maximum density of 1.9833 g/cm(3) and a minimum percentage of water absorption of 0.261. The optimal values of the compressive strength and flexural strength were obtained to be 9.628 and 28.081 (MPa), respectively. The sliding wear rate was in the range of 2.655 x 10(-8) -12.896 x 10(-8) (kg/m). Whereas the ranges for abrasives wear were obtained to be 0.0309-0.6459 (cm(3)) and 0.0386-0.1257 (cm(3)), under the conditions of loads and sliding speeds, respectively. The study suggested the incorporation of 25 wt. % of rice husk ash and 25 wt. % of sand with 50 wt. % of polycarbonates in composites for tribological applications. The work contributes towards the attainment of circular economy in the composite manufacturing industries. [GRAPHICS] . |
Similar Articles
| ID | Score | Article |
|---|---|---|
28609
|
Soni, A; Kumar, S; Majumder, B; Dam, H; Dutta, V; Das, PK Synergy of waste plastics and natural fibers as sustainable composites for structural applications concerning circular economy(2023) | |
| 28018
|
Soni, A; Das, PK; Yusuf, M; Pasha, AA; Irshad, K; Bourchak, M Synergy of RHA and silica sand on physico-mechanical and tribological properties of waste plastic-reinforced thermoplastic composites as floor tiles(2023)Environmental Science And Pollution Research, 30.0, 60 | |
| 10268
|
Singh, P; Singh, DN Polymer composites from waste plastics and reclaimed rubber from tires for sustainable development(2024) | |
| 4987
|
Soni, A; Das, PK; Kumar, S Selection of waste plastics for incorporation in agro-waste as sustainable building construction materials concerning circular economy: an integrated MCDM approach(2023)Clean Technologies And Environmental Policy, 25, 9 | |
| 13923
|
Taurino, R; Bondioli, F; Messori, M Use of different kinds of waste in the construction of new polymer composites: review(2023) | |
| 5873
|
Platnieks, O; Barkane, A; Ijudina, N; Gaidukova, G; Thakur, VK; Gaidukovs, S Sustainable tetra pak recycled cellulose/Poly(Butylene succinate) based woody-like composites for a circular economy(2020) | |
| 22021
|
Hamouda, T; Aly, NM Circular Economy of Composite Materials Using Waste Jute Fibers and Recycled Polyester Fibers as a Reinforcement for Packaging Applications(2022)Egyptian Journal Of Chemistry, 65.0, 13 | |
| 5817
|
Czarnecka-Komorowska, D; Wachowiak, D; Gizelski, K; Kanciak, W; Ondrusova, D; Pajtasová, M Sustainable Composites Containing Post-Production Wood Waste as a Key Element of the Circular Economy: Processing and Physicochemical Properties(2024)Sustainability, 16, 4 | |
| 13397
|
Shih, YF; Chang, CW; Hsu, TH; Dai, WY Application of Sustainable Wood-Plastic Composites in Energy-Efficient Construction(2024)Buildings, 14, 4 | |
| 7120
|
Basalp, D; Tihminlioglu, F; Sofuoglu, SC; Inal, F; Sofuoglu, A Utilization of Municipal Plastic and Wood Waste in Industrial Manufacturing of Wood Plastic Composites(2020)Waste And Biomass Valorization, 11, 10 |