| Title | Mechanical properties of demountable shear connectors under different confined conditions for reusable hybrid decks |
|---|---|
| ID_Doc | 63897 |
| Authors | Kavoura, F; Christoforidou, A; Pavlovic, M; Veljkovic, M |
| Title | Mechanical properties of demountable shear connectors under different confined conditions for reusable hybrid decks |
| Year | 2022 |
| Published | Steel And Composite Structures, 43, 4 |
| Abstract | In response to the sustainability requirements set in the EU Commission??s ???Green Deal??? towards reduction of the greenhouse gas emissions, it is estimated that the structural design for deconstruction is going to contribute considerably to the sustainable development of the built environment. The demountability of multi-material structural systems basically depends on the shear connectors used in the structural system. This paper focuses on a type of demountable injected shear connector with an injected steel-reinforced resin (iSRR) which consists of spherical steel particles embedded in a resin. Its application to steel-to concrete and steel-to-Fiber Reinforced Polymer (FRP) decks is presented along with its benefits. In parallel, an overview of the experimental and numerical research on the evaluation of the mechanical properties of the demountable bolted connectors with iSRR is discussed. Last, detailed finite element (FE) models and a parametric study are performed to quantify the confinement level of the SRR material influenced by the oversized hole diameter. |
Similar Articles
| ID | Score | Article |
|---|---|---|
6653
|
Kozma, A; Odenbreit, C; Braun, MV; Veljkovic, M; Nijgh, MP Push-out tests on demountable shear connectors of steel-concrete composite structures(2018) | |
| 22373
|
Kozma, A; Odenbreit, C; Braun, MV; Veljkovic, M; Nijgh, MP Push-out tests on demountable shear connectors of steel-concrete composite structures(2019) | |
| 4351
|
Lam, D; Dai, XH; Ashour, AF; Rehman, N Composite Structures In The Circular Economy(2016) | |
| 21060
|
Kozma, A; Odenbreit, C; Braun, MV Characterisation Of Demountable Shear Connector Systems In Composite Beams(2019) | |
| 15546
|
Nijgh, MP; Veljkovic, M Requirements for oversized holes for reusable steel-concrete composite floor systems(2020) | |
| 12691
|
Király, K; Dunai, L Experimental Study of Novel Demountable Shear Connectors for Steel-concrete Composite Buildings(2024)Periodica Polytechnica-Civil Engineering, 68.0, 2 | |
| 6823
|
Lam, D; Dai, XH; Ashour, A; Rahman, N Recent research on composite beams with demountable shear connectors(2017)Steel Construction-Design And Research, 10, 2 |