| Title | Hybrid Fly Ash-Based Geopolymeric Foams: Microstructural, Thermal and Mechanical Properties |
|---|---|
| ID_Doc | 7139 |
| Authors | Roviello, G; Ricciotti, L; Molino, AJ; Menna, C; Ferone, C; Asprone, D; Cioffi, R; Ferrandiz-Mas, V; Russo, P; Tarallo, O |
| Title | Hybrid Fly Ash-Based Geopolymeric Foams: Microstructural, Thermal and Mechanical Properties |
| Year | 2020 |
| Published | Materials, 13, 13 |
| Abstract | This research investigates the preparation and characterization of new organic-inorganic geopolymeric foams obtained by simultaneously reacting coal fly ash and an alkali silicate solution with polysiloxane oligomers. Foaming was realized in situ using Si(0)as a blowing agent. Samples with density ranging from 0.3 to 0.7 g/cm(3)that show good mechanical properties (with compressive strength up to approximate to 5 MPa for a density of 0.7 g/cm(3)) along with thermal performances (lambda = 0.145 +/- 0.001 W/m center dot K for the foamed sample with density 0.330 g/cm(3)) comparable to commercial lightweight materials used in the field of thermal insulation were prepared. Since these foams were obtained by valorizing waste byproducts, they could be considered as low environmental impact materials and, hence, with promising perspectives towards the circular economy. |
| https://www.mdpi.com/1996-1944/13/13/2919/pdf?version=1593525998 |
Similar Articles
| ID | Score | Article |
|---|---|---|
12542
|
Ercoli, R; Laskowska, D; Nguyen, V; Le, VS; Louda, P; Los, P; Ciemnicka, J; Pralat, K; Renzulli, A; Paris, E; Basilici, M; Rapiejko, C; Buczkowska, KE Mechanical and Thermal Properties of Geopolymer Foams (GFs) Doped with By-Products of the Secondary Aluminum Industry(2022)Polymers, 14.0, 4 | |
| 14146
|
Zygmunt-Kowalska, B; Pielichowska, K; Trestka, P; Ziabka, M; Kuznia, M The Effect of Ash Silanization on the Selected Properties of Rigid Polyurethane Foam/Coal Fly Ash Composites(2022)Energies, 15, 6 | |
| 18468
|
Kozub, B; Bazan, P; Gailitis, R; Korniejenko, K; Mierzwinski, D Foamed Geopolymer Composites with the Addition of Glass Wool Waste(2021)Materials, 14.0, 17 | |
| 13486
|
Gómez-Casero, MA; De Dios-Arana, C; Bueno-Rodríguez, JS; Pérez-Villarejo, L; Eliche-Quesada, D Physical, mechanical and thermal properties of metakaolin-fly ash geopolymers(2022) | |
| 19363
|
Lach, M; Plawecka, K; Bak, A; Lichocka, K; Korniejenko, K; Cheng, A; Lin, WT Determination of the Influence of Hydraulic Additives on the Foaming Process and Stability of the Produced Geopolymer Foams(2021)Materials, 14.0, 17 | |
| 9133
|
Boros, A; Erdei, G; Korim, T Development of Alkali Activated Inorganic Foams Based on Construction and Demolition Wastes for Thermal Insulation Applications(2023)Materials, 16.0, 11 | |
| 29770
|
Kairyte, A; Kremensas, A; Vaitkus, S; Czlonka, S; Strakowska, A Fire Suppression and Thermal Behavior of Biobased Rigid Polyurethane Foam Filled with Biomass Incineration Waste Ash(2020)Polymers, 12.0, 3 |