| Title | 3-D Printable Polymer Pelletizer Chopper for Fused Granular Fabrication-Based Additive Manufacturing |
|---|---|
| ID_Doc | 7147 |
| Authors | Woern, AL; Pearce, JM |
| Title | 3-D Printable Polymer Pelletizer Chopper for Fused Granular Fabrication-Based Additive Manufacturing |
| Year | 2018 |
| Published | Inventions, 3, 4 |
| Abstract | Although distributed additive manufacturing can provide high returns on investment, the current markup on commercial filament over base polymers limits deployment. These cost barriers can be surmounted by eliminating the entire process of fusing filament by three-dimensional (3-D) printing products directly from polymer granules. Fused granular fabrication (FGF) (or fused particle fabrication (FPF)) is being held back in part by the accessibility of low-cost pelletizers and choppers. An open-source 3-D printable invention disclosed here allows for precisely controlled pelletizing of both single thermopolymers as well as composites for 3-D printing. The system is designed, built, and tested for its ability to provide high-tolerance thermopolymer pellets with a number of sizes capable of being used in an FGF printer. In addition, the chopping pelletizer is tested for its ability to chop multi-materials simultaneously for color mixing and composite fabrication as well as precise fractional measuring back to filament. The US$185 open-source 3-D printable pelletizer chopper system was successfully fabricated and has a 0.5 kg/h throughput with one motor, and 1.0 kg/h throughput with two motors using only 0.24 kWh/kg during the chopping process. Pellets were successfully printed directly via FGF as well as indirectly after being converted into high-tolerance filament in a recyclebot. |
Similar Articles
| ID | Score | Article |
|---|---|---|
14079
|
Alexandre, A; Sanchez, FCA; Boudaoud, H; Camargo, M; Pearce, JM Mechanical Properties of Direct Waste Printing of Polylactic Acid with Universal Pellets Extruder: Comparison to Fused Filament Fabrication on Open-Source Desktop Three-Dimensional Printers(2020)3D Printing And Additive Manufacturing, 7, 5 | |
| 18438
|
Castanon-Jano, L; Palomera-Obregon, P; Lazaro, M; Blanco-Fernandez, E; Blasón, S Enhancing sustainability in polymer 3D printing via fusion filament fabrication through integration of by-products in powder form: mechanical and thermal characterization(2024)International Journal Of Advanced Manufacturing Technology, 133.0, 3-4 | |
| 29620
|
Fontana, L; Giubilini, A; Arrigo, R; Malucelli, G; Minetola, P Characterization of 3D Printed Polylactic Acid by Fused Granular Fabrication through Printing Accuracy, Porosity, Thermal and Mechanical Analyses(2022)Polymers, 14.0, 17 |