| Title | Assessment of Leaching Characteristics of Solidified Products Containing Secondary Alkaline Lead Slag |
|---|---|
| ID_Doc | 9193 |
| Authors | Stulovic, M; Radovanovic, D; Kamberovic, Z; Korac, M; Andic, Z |
| Title | Assessment of Leaching Characteristics of Solidified Products Containing Secondary Alkaline Lead Slag |
| Year | 2019 |
| Published | International Journal Of Environmental Research And Public Health, 16.0, 11 |
| Abstract | Reuse of waste is one of the main principles of sustainable development and circular economy. Secondary alkaline lead slag is a hazardous waste generated in the recycling process of lead-acid batteries that may be suitable in construction materials. The environmental impact of the use of lead slag as a partial replacement of fine aggregates in the cement-based stabilization/solidification (S/S) process for the preparation of concrete was studied in this paper. Solidified products containing 10%, 15%, 20%, and 25% slag were laboratory tested by unconfined compressive strength (UCS) analyses and the Toxicity Characteristic Leaching Procedure (TCLP). At the same time, the leachability of toxic elements from solidified products with a high percent of slag was evaluated under environmental conditions for during one year. The results of the UCS and TCLP indicated that utilization of this type of slag in cement-based applications may be justified with its controlled addition. However, the described application of the slag was disputed due to the high release of As under high alkaline environmental conditions. Eh-pH analyses and the geochemical modeling using the software PHREEQC were evaluated, as well as the mechanism of pollutant (Pb, As) immobilization (precipitation, adsorption) as a function of pH conditions. |
| https://www.mdpi.com/1660-4601/16/11/2005/pdf?version=1559727744 |
Similar Articles
| ID | Score | Article |
|---|---|---|
8296
|
Chen, QS; Tao, YB; Feng, Y; Zhang, QL; Liu, YK Utilization of modified copper slag activated by Na2SO4 and CaO for unclassified lead/zinc mine tailings based cemented paste backfill(2021) | |
| 20661
|
Mikula, K; Skrzypczak, D; Izydorczyk, G; Basladynska, S; Szustakiewicz, K; Gorazda, K; Moustakas, K; Chojnacka, K; Witek-Krowiak, A From hazardous waste to fertilizer: Recovery of high-value metals from smelter slags(2022) | |
| 10676
|
Kinnunen, P; Mäkinen, J; Salo, M; Soth, R; Komnitsas, K Efficiency of Chemical and Biological Leaching of Copper Slag for the Recovery of Metals and Valorisation of the Leach Residue as Raw Material in Cement Production(2020)Minerals, 10, 8 | |
| 5489
|
Czop, M; Kajda-Szczesniak, M; Zajusz-Zubek, E; Biss, W; Bochenko, A; Brzezina, L; Czech, D; Turyla, K The Role of Slag from the Combustion of Solid Municipal Waste in Circular Economy(2022) | |
| 22180
|
Czop, M; Lazniewska-Piekarczyk, B Use of Slag from the Combustion of Solid Municipal Waste as A Partial Replacement of Cement in Mortar and Concrete(2020)Materials, 13.0, 7 | |
| 27816
|
Roychand, R; Pramanik, BK; Zhang, GM; Setunge, S Recycling steel slag from municipal wastewater treatment plants into concrete applications - A step towards circular economy(2020) | |
| 26492
|
Moreno-González, R; Macías, F; Meyer, A; Schneider, P; Nieto, JM; Olfas, M; Cánovas, CR Life cycle assessment of management/valorisation practices for metal-sludge from treatment of acid mine drainage(2023) |