| Title | Ternary Blends for Self-Compacting Mortars Production Composed by Electric Arc Furnace Dust and Other Industrial by-Products |
|---|---|
| ID_Doc | 9280 |
| Authors | López-Uceda, A; Cantador-Fernández, D; Da Silva, PR; de Brito, J; Fernández-Rodríguez, JM; Jiménez, JR |
| Title | Ternary Blends for Self-Compacting Mortars Production Composed by Electric Arc Furnace Dust and Other Industrial by-Products |
| Year | 2022 |
| Published | Materials, 15.0, 15 |
| Abstract | This study is framed within the circular economy model through the valorisation of industrial by-products. This research shows the results of producing self-compacting mortars (SCMs) with electric arc furnace dust (EAFD) and other industrial by-products such as fly ash, conforming (FA) or not conforming (NcFA), from coal-fired power plants, or recovery filler (RF) from hot-mix asphalt plants. Three batches of SCMs, each with one industrial-by product (FA, NcFA, or RF), and three levels of EAFD ratio incorporation (0%, 10%, 20%), were tested. An extra batch with a greater amount of FA was manufactured. When the incorporation ratio of EAFD rose, the mechanical strength decreased, due to the presence of a calcium zinc hydroxide dihydrate phase; nevertheless, this decrease diminished over time. All SCM mixes, except the 40C 40FA 20 EAFD mix, were above 20 MPa at 28 days. All mixes named 70C and 40C reached 40 and 30 MPa, respectively, at 90 days. Mixes with EAFD showed less capillarity and no difference in water absorption by immersion with respect to mixes without EAFD after 91 days. The SCMs designed proved to be stable in terms of leaching of the heavy metals contained in EAFD, where all the hardened SCMs were classified as inert. |
| https://www.mdpi.com/1996-1944/15/15/5347/pdf?version=1659532863 |
Similar Articles
| ID | Score | Article |
|---|---|---|
14671
|
Lozano-Lunar, A; da Silva, PR; de Brito, J; Fernández, JM; Jiménez, JR Safe use of electric arc furnace dust as secondary raw material in self compacting mortars production(2019) | |
| 1870
|
Lozano-Lunar, A; Barbudo, A; Fernández, JM; Jiménez, JR Promotion of circular economy: steelwork dusts as secondary raw material in conventional mortars(2020)Environmental Science And Pollution Research, 27, 1 | |
| 21949
|
Vilarinho, IS; Guimaraes, G; Labrincha, JA; Seabra, MP Development of Eco-Mortars with the Incorporation of Municipal Solid Wastes Incineration Ash(2023)Materials, 16.0, 21 | |
| 21822
|
Ulas, MA; Culcu, MB; Ulucan, M Valorization of recycled aggregates to eco-efficient lightweight self-compacting mortars: Studies on microstructure, mechanical, durability, environmental, and economic properties(2024) | |
| 15036
|
Slomka-Slupik, B Self-Immobilizing Metals Binder for Construction Made of Activated Metallurgical Slag, Slag from Lignite Coal Combustion and Ash from Biomass Combustion(2021)Materials, 14, 11 | |
| 15775
|
Nair, AT; Mathew, A; Archana, AR; Akbar, MA Use of hazardous electric arc furnace dust in the construction industry: A cleaner production approach(2022) | |
| 15058
|
Seifi, S; Sebaibi, N; Levacher, D; Boutouil, M Mechanical performance of a dry mortar without cement, based on paper fly ash and blast furnace slag(2019) | |
| 14086
|
Sargent, P; Sandanayake, M; Law, DW; Hughes, DJ; Shifa, F; Borthwick, B; Scott, P Strength, mineralogical, microstructural and CO2 emission assessment of waste mortars comprising excavated soil, scallop shells and blast furnace slag(2024) | |
| 25609
|
Sharifikolouei, E; Canonico, F; Salvo, M; Baino, F; Ferraris, M Vitrified and nonvitrified municipal solid wastes as ordinary Portland cement (OPC) and sand substitution in mortars(2020)International Journal Of Applied Ceramic Technology, 17, 2 | |
| 8172
|
Modolo, RCE; Senff, L; Ferreira, VM; Tarelho, LAC; Moraes, CAM Fly ash from biomass combustion as replacement raw material and its influence on the mortars durability(2018)Journal Of Material Cycles And Waste Management, 20.0, 2 |