| Title | Recycling of marine dredged materials, coal fly ash and waste foundry sand as lightweight aggregates |
|---|---|
| ID_Doc | 9643 |
| Authors | Erdogan, PÖ; Basar, HM |
| Title | Recycling of marine dredged materials, coal fly ash and waste foundry sand as lightweight aggregates |
| Year | 2019 |
| Published | Journal Of The Faculty Of Engineering And Architecture Of Gazi University, 34.0, 3 |
| Abstract | Nowadays, sustainable environmental management of high quantities of marine dredged material (DM) together with other industrial wastes is a common problem across Turkey. The beneficial use/recovery of DM and wastes in the production of lightweight aggregate (LWA) instead of dumping at sea/disposal will provide substantial environmental savings in terms of circular economy. In this study, the production of LWA by using marine DM, coal fly ash and waste foundry sand were investigated. Three different mixtures of raw materials were granulated in pelletizing disc, dried at 105 degrees C and sintered in muffle furnace at 1100, 1150, 1170, 1180 and 1190 degrees C with 5-10 degrees C/min heating rates and 10-20 min sintering period. Sintered LWAs were analyzed in terms of physical, mechanical, microstructural, mineralogical and leaching properties. LWA produced at 1190 degrees C sintering temperature, 5 degrees C/min heating rate and 20 min sintering period resulted in better aggregate properties. Furthermore, according to the leaching test results; it is observed that the parameters of the eluate and original waste were lower than the Class III (inert waste) landfilling limit values due to the entrapment of those into the silicate matrix in sintering process; thus, causing no environmental risk to be used at construction sector. |
Similar Articles
| ID | Score | Article |
|---|---|---|
20853
|
Blasenbauer, D; Huber, F; Maehl, J; Fellner, J; Lederer, J Comparing the quantity and quality of glass, metals, and minerals present in waste incineration bottom ashes from a fluidized bed and a grate incinerator(2023) | |
| 10189
|
Lim, YC; Shih, YJ; Tsai, KC; Yang, WD; Chen, CW; Dong, CD Recycling dredged harbor sediment to construction materials by sintering with steel slag and waste glass: Characteristics, alkali-silica reactivity and metals stability(2020) | |
| 27933
|
Gronba-Chy, A; Generowicz, A; Alwaeli, M; Mannheim, V; Graz, K; Kwasnicki, P; Kramek, A Municipal waste utilization as a substitute for natural aggregate in the light of the circular economy(2024) | |
| 15733
|
Recko, K Production of Alternative Fuels Based on Municipal Sewage Sludge and Selected Types of ELV Waste(2022)Energies, 15, 16 | |
| 6411
|
Assi, A; Bilo, F; Zanoletti, A; Ponti, J; Valsesia, A; La Spina, R; Zacco, A; Bontempi, E Zero-waste approach in municipal solid waste incineration: Reuse of bottom ash to stabilize fly ash(2020) | |
| 22989
|
Mühl, J; Skutan, S; Stockinger, G; Blasenbauer, D; Lederer, J Glass recovery and production of manufactured aggregate from MSWI bottom ashes from fluidized bed and grate incineration by means of enhanced treatment(2023) | |
| 10418
|
Lim, YC; Chen, CF; Chen, CW; Dong, CD Development of alternative disposals for waste rice husk and dredged harbor sediment by sintering as lightweight aggregates(2023)Environmental Technology, 44, 19 | |
| 25511
|
Blajer, M; Stopkowicz, A; Adamczyk, J; Cala, M The Preliminary Research Of The Physico-Mechanical Properties Of Aggregates Based On The Colliery Shale, Supplemented By Fly Ash(2019)Archives Of Mining Sciences, 64, 1 | |
| 4587
|
Abinaya, TL; Balasubramanian, M A Circular Economy In Waste Management Carrying Out Experimental Evaluation Of Compressed Stabilized Earth Block Using Municipal Solid Waste Incinerator Fly Ash(2022) | |
| 16660
|
Burlakovs, J; Jani, Y; Kriipsalu, M; Vincevica-Gaile, Z; Kaczala, F; Celma, G; Ozola, R; Rozina, L; Rudovica, V; Hogland, M; Viksna, A; Pehme, KM; Hogland, W; Klavins, M On the way to 'zero waste' management: Recovery potential of elements, including rare earth elements, from fine fraction of waste(2018) |