| Title | Mechanical and Hydraulic Properties of Recycled Concrete Aggregates Mixed with Clay Brick Aggregates and Particle Breakage Characteristics for Unbound Road Base and Subbase Materials in Vietnam |
|---|---|
| ID_Doc | 9745 |
| Authors | Nguyen, TL; Nguyen, VT; Nguyen, HG; Matsuno, A; Sakanakura, H; Kawamoto, K |
| Title | Mechanical and Hydraulic Properties of Recycled Concrete Aggregates Mixed with Clay Brick Aggregates and Particle Breakage Characteristics for Unbound Road Base and Subbase Materials in Vietnam |
| Year | 2022 |
| Published | Sustainability, 14.0, 8 |
| Abstract | The construction industry is one of the key industries with high potential for the circular economy; the promotion of reuse and recycling of construction and demolition waste (CDW) is essential for sustainable urban development. In this study, a series of compaction, California bearing ratio, saturated hydraulic conductivity, and particle breakage tests of well- and poor-graded mixtures of recycled clay brick aggregates (RCBs) and recycled concrete aggregates (RCAs) with maximum aggregate diameters of 19, 25, and 37.5 mm were carried out to examine the practical application of those mixtures to unbound roadbed materials in Vietnam. The experimental results suggest that the maximum amount of RCBs added to RCAs should be less than 30% when applied to unbound roadbed materials. In addition, it was found that the mixing proportions of RCBs and RCAs and the maximum aggregate diameter, gradation of aggregates, and initial moisture condition control the saturated hydraulic conductivity. Further, the particle breakage characteristics under compaction were carefully examined, and it was found that the percentage increment/decrement, as well as a newly introduced method of estimating the mixing proportions of RCAs and RCBs in the fine fraction (<2.36 mm), is effective in understanding the mechanism of particle breakage of RCA and RCB mixtures. |
Similar Articles
| ID | Score | Article |
|---|---|---|
17682
|
Kheirbek, A; Ibrahim, A; Asaad, M; Wardeh, G Experimental Study on the Physical and Mechanical Characteristics of Roller Compacted Concrete Made with Recycled Aggregates(2022)Infrastructures, 7, 4 | |
| 25022
|
Dias, S; Almeida, J; Tadeu, A; de Brito, J Alternative concrete aggregates - Review of physical and mechanical properties and successful applications(2024) | |
| 8948
|
Pico-Cortés, C; Villagrán-Zaccardi, Y Unraveling the Interplay of Physical-Chemical Factors Impacting the Carbonation Performance of Recycled Aggregate Concrete(2023)Materials, 16.0, 16 | |
| 13118
|
Letelier, V; Bustamante, M; Muñoz, P; Rivas, S; Ortega, JM Evaluation of mortars with combined use of fine recycled aggregates and waste crumb rubber(2021) | |
| 21532
|
Pacheco, J; de Brito, J Recycled Aggregates Produced from Construction and Demolition Waste for Structural Concrete: Constituents, Properties and Production(2021)Materials, 14.0, 19 | |
| 14338
|
Joseph, HS; Pachiappan, T; Avudaiappan, S; Flores, EIS A Study on Mechanical and Microstructural Characteristics of Concrete Using Recycled Aggregate(2022)Materials, 15, 21 | |
| 13872
|
Tefa, L; Bianco, I; Blengini, GA; Bassani, M Integrated and comparative Structural-LCA analysis of unbound and cement-stabilized construction and demolition waste aggregate for subbase road pavement layers formation(2022) | |
| 6276
|
Juan-Valdés, A; Rodríguez-Robles, D; García-González, J; Gómez, MISD; Guerra-Romero, MI; De Belie, N; Morán-del Pozo, JM Mechanical and microstructural properties of recycled concretes mixed with ceramic recycled cement and secondary recycled aggregates. A viable option for future concrete(2021) | |
| 22496
|
Sattar, O; Khalid, U; Rehman, ZU; Kayani, WI; Haider, A Impact of crushing shape and geopolymerization on reclaimed concrete aggregate for recycling in the flexible pavement: an enhanced circular economy solution(2024)Road Materials And Pavement Design, 25.0, 9 | |
| 8334
|
Corbu, O; Puskas, A; Dragomir, ML; Har, N; Toma, IO Eco-Innovative Concrete for Infrastructure Obtained with Alternative Aggregates and a Supplementary Cementitious Material (SCM)(2023)Coatings, 13.0, 10 |