| Title |
Optimization of fiber reinforced lightweight rubber concrete mix design for 3D printing |
| ID_Doc |
12471 |
| Authors |
Xiong, BC; Nie, P; Liu, HB; Li, XX; Li, ZH; Jin, WY; Cheng, X; Zheng, GM; Wang, L |
| Title |
Optimization of fiber reinforced lightweight rubber concrete mix design for 3D printing |
| Year |
2024 |
| Published |
|
| DOI |
10.1016/j.jobe.2024.109105 |
| Abstract |
A novel lightweight insulation concrete for 3D concrete printing is developed in this study, which incorporates crumb rubber (R) as a modifier to achieve low density, exceptional thermal insulation properties, and high ductility. The mechanical properties and fiber reinforcement mechanism of lightweight rubber aggregate concrete (CR) are investigated under varying R substitution rates, encompassing compressive strength, flexural strength, tensile strength, and tensile strain of CR. The thermal conductivity test offers insights into the thermal insulation mechanism of CR. The study investigates the compatibility between the material properties of fiber reinforced rubber concrete and the parameter matching of concrete printing equipment, as well as explores the relationship between interlayer bond strength and material composition. The optimal water- binder ratio for 3D printed fiber-reinforced lightweight rubber concrete compatible with printer equipment is determined through fluidity experiments and buildability tests. The findings indicate a statistically significant decrease in CR density by 16.5% when the replacement rate reaches 30%. Although the mechanical strength of CR decrease with the increasing substitution rate of R, the tensile strain showe an increasing trend. The addition of glass fiber reinforcement resulted in a notable enhancement of the mechanical properties and a significant increase in tensile strain for CR. In addition, CR thermal conductivity is reduced by 20.65%, with the excellent thermal insulation performance. This study is of great significance to promote the rational utilization of rubber resources, promote the development of circular economy, and build a conservation- oriented and environment-friendly society. |
| Author Keywords |
3D printing; Concrete substrate; Lightweight insulation; Mechanical properties; Green building |
| Index Keywords |
Index Keywords |
| Document Type |
Other |
| Open Access |
Open Access |
| Source |
Science Citation Index Expanded (SCI-EXPANDED) |
| EID |
WOS:001289144000001 |
| WoS Category |
Construction & Building Technology; Engineering, Civil |
| Research Area |
Construction & Building Technology; Engineering |
| PDF |
|