| Title |
Enhancing industrial applicability of aluminum alloys chips recycling through Friction Stir Extrusion: thin wires production process |
| ID_Doc |
13653 |
| Authors |
Buffa, G; Campanella, D; Adnan, M; La Commare, U; Ingarao, G; Fratini, L |
| Title |
Enhancing industrial applicability of aluminum alloys chips recycling through Friction Stir Extrusion: thin wires production process |
| Year |
2023 |
| Published |
|
| DOI |
10.1016/j.mfglet.2023.08.131 |
| Abstract |
Friction Stir Extrusion is one of the most promising solid-state chip recycling techniques because of its relative simplicity and high efficiency. One of the most straightforward applications for the process is the production of recycled wires to be used as filler material in welding or welding-based additive manufacturing processes, in order to create an industrial symbiosis link, fostering a circular economy and enhancing the Technology Readiness Level (TRL)(1) of the process. The scalability of the process to the thin wires needed for such applications has not been investigated so far. In this paper, an experimental and numerical analysis was developed. A dedicated numerical model was first validated and then used to design the tool geometry. The effect of tool rotation and tool force on both "standard" mechanical properties, as UTS and microhardness, and specific properties for the envisaged application, as the wrapping around reels with different radii, was investigated. The numerical model results were used to explain the influence of the process parameters on the distribution of the main field variables, i.e., temperature, strain, and strain rate, as well as on material flow. It was found that a conical shoulder surface favors the conditions for effective solid bonding. Low values of the extrusion force have detrimental effects on the wires properties as they result either in insufficient strain, or hot cracking defects. (c) 2023 The Authors. Published by ELSEVIER Ltd. This is an open access article under the CC BY-NC-ND license (https://creativecommons.org/licenses/by-nc-nd/4.0) Peer-review under responsibility of the Scientific Committee of the NAMRI/SME. |
| Author Keywords |
Solid state; recycling; aluminum alloys; FEM |
| Index Keywords |
Index Keywords |
| Document Type |
Other |
| Open Access |
Open Access |
| Source |
Emerging Sources Citation Index (ESCI) |
| EID |
WOS:001089014800046 |
| WoS Category |
Engineering, Manufacturing; Materials Science, Multidisciplinary |
| Research Area |
Engineering; Materials Science |
| PDF |
|