| Title |
Surface polishing and modification of Ti-6Al-4V alloy by shear thickening polishing |
| ID_Doc |
15883 |
| Authors |
Wang, JH; Zhou, Y; Qiao, Z; Goel, S; Wang, JH; Wang, X; Chen, HY; Yuan, JL; Lyu, B |
| Title |
Surface polishing and modification of Ti-6Al-4V alloy by shear thickening polishing |
| Year |
2023 |
| Published |
|
| DOI |
10.1016/j.surfcoat.2023.129771 |
| Abstract |
In this study, a comparison of three newly developed polishing techniques namely, shear thickening polishing (STP), Chemistry enhanced STP (C-STP) and Electrolysis enhanced STP (E-STP) was made to investigate their suitability to Ti-6Al-4V biomaterials polishing and modification, which can produce Beilby layer after polishing and enhance mechanical and biological performance. The surface roughness Sa after STP was about 13.8 nm with a material removal rate of 54.3 nm/min. The C-STP showed the lowest surface roughness of 7.2 nm which was almost half that of STP and the MRR during C-STP was almost 2.1 times that of the conventional STP. The STP did not lead to any change of the surface composition, whereas a 136 nm thick Beilby layer was observed to form during the C-STP which revealed a lower friction coefficient of 0.04 as well as improved osteoblast cell activity. The E-STP showed an intermittent improvement as it provided a surface roughness of 10.2 nm and 1.6 times MRR than that obtained from conventional STP. Due to the dense oxide film of about 60 nm, the E-STP processed surface showed the best wettability and corrosion resistance. Overall, we reveal an important pathway for achieving scalable finishing on Ti-6Al-4V with desirable surface characteristics. |
| Author Keywords |
Ti-6Al-4V alloy; Shear thickening polishing; Surface modification; Surface characteristics; Biomaterials |
| Index Keywords |
Index Keywords |
| Document Type |
Other |
| Open Access |
Open Access |
| Source |
Science Citation Index Expanded (SCI-EXPANDED) |
| EID |
WOS:001042114900001 |
| WoS Category |
Materials Science, Coatings & Films; Physics, Applied |
| Research Area |
Materials Science; Physics |
| PDF |
https://doi.org/10.1016/j.surfcoat.2023.129771
|