| Title |
Microstructural characterisation of cementitious composite incorporating polymeric fibre: A comprehensive review |
| ID_Doc |
17824 |
| Authors |
Tran, NP; Gunasekara, C; Law, DW; Houshyar, S; Setunge, S |
| Title |
Microstructural characterisation of cementitious composite incorporating polymeric fibre: A comprehensive review |
| Year |
2022 |
| Published |
|
| DOI |
10.1016/j.conbuildmat.2022.127497 |
| Abstract |
Synthetic fibres such as polypropylene (PP), polyvinyl alcohol (PVA), and polyethylene (PE) in both virgin and recycled forms have been widely employed in cementitious composites. Apart from providing bridging action for absorbing stress-induced energy, the addition of polymeric fibres also changes the pore systems in the microstructure of cementitious materials. This paper reviews the microstructure changes of cementitious composite incorporating these three polymeric fibres under both ambient and high-temperature condition. The microstructure of polymeric fibre reinforced concrete is characterised by higher porosity than plain concrete. The use of hydrophilic PVA fibres with microfibres induces pore-refining effects. At elevated temperature PP, PVA and low-density PE (LDPE) exhibit good spalling resistance in concrete due to the formation of microcracks and empty channels left by melted fibre. However, high-density PE (HDPE) fibre is ineffective in mitigating the increased vapour pressure in concrete due to a low coefficient of thermal expansion and high viscosity. Furthermore, to achieve well-balanced interfacial properties, physical/chemical surface modification is necessitated. The introduction of reactive functional groups into the polymer chain of hydrophobic PP and PE fibre significantly enhance fibre-matrix interaction in strengthening interfacial properties with cement paste. Whereas, neutralising hydroxyl functional groups in the PVA polymer chain counteracts extreme delamination or fibrillation of polar PVA fibre when they interact with the cement matrix. With surface modification, the possibility of premature rupture of PVA fibre can be minimised, while improving the transfer of stress-induced energy between the cement matrix and the fibre. |
| Author Keywords |
Porosity; ITZ; Microstructure; Synthetic fibre; Fibre-matrix interaction; Surface treatment; Elevated temperature |
| Index Keywords |
Index Keywords |
| Document Type |
Other |
| Open Access |
Open Access |
| Source |
Science Citation Index Expanded (SCI-EXPANDED) |
| EID |
WOS:000793416000001 |
| WoS Category |
Construction & Building Technology; Engineering, Civil; Materials Science, Multidisciplinary |
| Research Area |
Construction & Building Technology; Engineering; Materials Science |
| PDF |
|