| Title |
TiAlN coatings tribology for textile machinery parts |
| ID_Doc |
18128 |
| Authors |
Hussain, A; Podgursky, V; Goljandin, D; Antonov, M |
| Title |
TiAlN coatings tribology for textile machinery parts |
| Year |
2021 |
| Published |
Proceedings Of The Estonian Academy Of Sciences, 70, 2 |
| DOI |
10.3176/proc.2021.2.04 |
| Abstract |
Rough, damaged, and distorted post-consumer natural and synthetic polymers cause wear and damage to textile machinery parts, presenting a major obstacle to the quality of recycled products. In this research, TiAlN coatings were used to measure the coefficient of friction (COF) for tribological properties. The scanning electron microscope (SEM) studies of cotton textiles revealed surface damage, distortions, and loose fibres produced on the fabric surface. SEM morphology of TiAlN coatings was found smooth and uniform. Additionally, Contour GT-K 3D optical microscope and mechanical profilometer (Mahr Perthometer) were used for coating surface analysis. The average coating surface roughness parameters were Rmax (0.30 mu m), Rz (0.26 mu m), and Rp (0.17 mu m). The microhardness value was 35 GPa on the HV scale. The lower surface roughness and higher hardness values are an indication of reasonable quality and performance of textile fabrics during recycling. The dynamic COF values were obtained from 0.47 to 0.30 in warp and from 0.35 to 0.23 in weft directions. Higher COF values occurred in the warp direction due to lower thread densities, rough surface, preferred fibre orientation, randomly oriented fibres, and a plain-woven structure. Based on the COF values, permanent deformation, and morphology evaluations, TiAlN coatings could be used optimistically for surface modification of shredding, cutting, and textile machinery parts. The TiAlN coatings applications in industries could also enhance the quality and performance of recycled textile products. |
| Author Keywords |
fabric tribology; coatings; wear; fabric friction; textile fabrics; textile machinery |
| Index Keywords |
Index Keywords |
| Document Type |
Other |
| Open Access |
Open Access |
| Source |
Science Citation Index Expanded (SCI-EXPANDED) |
| EID |
WOS:000668180800004 |
| WoS Category |
Multidisciplinary Sciences |
| Research Area |
Science & Technology - Other Topics |
| PDF |
https://kirj.ee/wp-content/plugins/kirj/pub/proc-2-2021-163-171_20210413103751.pdf
|