| Abstract |
In recent years, there has been a marked increase in the amount of municipal waste generated in Poland. In the context of circular economy assumptions, the key is the availability of technologies that would make it possible to safely process and reuse waste, especially when it is difficult to manage. One such direction is thermal waste treatment. In 2020, 21.6% of all municipal waste was subjected to this process. Consequently, the amount of ash generated is significant (approximately 2,823,000 tons annually). One of the uses of waste materials is the sealing of earth hydrotechnical facilities, such as flood embankments, water dams, and embankments of waste landfills. For this purpose, cut-off screens made of hardening slurries are used. In order to improve the tightness and corrosion resistance of hardening suspensions, combustion by-products are added to their composition. The article presents an assessment of the possibility of using ashes from municipal waste incineration as an additive to hardening slurries. It also discusses the technological and operational parameters of hardening slurries with the addition of the ashes in question. Binding requirements for hardening slurries used for the construction of cut-off walls is also defined. The experiment showed that the tested hardening slurries meet most of the suitability criteria. Further research directions are proposed to fully identify other properties of hardening slurries in terms of their environmental impact. |