| Title |
A future application of pulse plating - silver recovery from hydrometallurgical bottom ash leachant |
| ID_Doc |
25105 |
| Authors |
Elomaa, H; Halli, P; Sirviö, T; Yliniemi, K; Lundström, M |
| Title |
A future application of pulse plating - silver recovery from hydrometallurgical bottom ash leachant |
| Year |
2018 |
| Published |
Transactions Of The Institute Of Metal Finishing, 96, 5 |
| DOI |
10.1080/00202967.2018.1507320 |
| Abstract |
In the current study, electrodeposition-redox replacement was applied to a hydrometallurgical solution with the main elements of Ca (13.8 g L-1), Al (4.7 g L-1), Cu (2.5 g L-1), Zn (1.2 g L-1), Fe (1.2 g L-1), S (1 g L-1), Mg (0.8 g L-1), P (0.5 g L-1) and Ag (3.5 ppm). The solution originated from the leaching experiment of incinerator plant bottom ash, which was dissolved into 2 M HCl media at T=30 degrees C. The resulting deposit on the electrode surface was analysed with SEM-EDS and the observed Ag/(Cu + Zn) ratio (0.3) indicated remarkable enrichment of silver on the surface, when compared to the ratio of these elements (Ag/(Cu+Zn)) in the solution (6.8 x 10(-5)). The enrichment of Ag vs. (Cu + Zn) could be demonstrated to increase ca. 4500 fold compared to the ratio of the elements in solution. |
| Author Keywords |
Bottom ash; leaching; silver recovery; electrodeposition-redox replacement; circular economy |
| Index Keywords |
Index Keywords |
| Document Type |
Other |
| Open Access |
Open Access |
| Source |
Science Citation Index Expanded (SCI-EXPANDED) |
| EID |
WOS:000444095300005 |
| WoS Category |
Electrochemistry; Metallurgy & Metallurgical Engineering; Materials Science, Coatings & Films |
| Research Area |
Electrochemistry; Metallurgy & Metallurgical Engineering; Materials Science |
| PDF |
|