| Abstract |
A cleaner solvent-free process of used cooking oil epoxidation has been developed. The epoxidation reactions were carried out using "in situ"-formed peroxy acid. A variety of ion exchange resins with different cross-linking percentages and particle sizes such as Dowex 50WX2 50-100, Dowex 50WX2 100-200, Dowex 50WX2 200-400, Dowex 50WX4 50-100, Dowex 50WX4 100-200, Dowex 50WX4 200-400, Dowex 50WX8 50-100, Dowex 50WX8 100-200, Dowex 50WX8 200-400 were used in the synthesis as heterogeneous catalysts. No significant effect of the size as well as porosity of the catalysts on the properties of the final products was observed. In order to develop a more economically beneficial process, a much cheaper heterogeneous catalyst-Amberlite IR-120-was used and the properties of the epoxidized oil were compared with the bio-components obtained in the reaction catalyzed by the Dowex resins. The epoxidized waste oils obtained in the experiments were characterized by epoxy values in the range of 0.32-0.35 mol/100 g. To reduce the amount of waste, the reusability of the ion exchange resin in the epoxidation reaction was studied. Ten reactions were carried out using the same catalyst and each synthesis was monitored by determination of epoxy value changes vs. time of the reactions. It was noticed that in the case of the reactions where the catalyst was reused for the third and fourth time the content of oxirane rings was higher by 8 and 6%, respectively, compared to the reaction where the catalyst was used only one time. Such an observation has not been reported so far. The epoxidation process with catalyst recirculation is expected to play an important role in the development of a new approach to the environmentally friendly solvent-free epoxidation process of waste oils. |