| Title |
Techno-economic analysis of geopolymer production from the coal fly ash with high iron oxide and calcium oxide contents |
| ID_Doc |
26478 |
| Authors |
You, SM; Ho, SW; Li, TT; Maneerung, T; Wang, CH |
| Title |
Techno-economic analysis of geopolymer production from the coal fly ash with high iron oxide and calcium oxide contents |
| Year |
2019 |
| Published |
|
| DOI |
10.1016/j.jhazmat.2018.08.089 |
| Abstract |
In this work, we firstly examined the technical feasibility of geopolymer synthesis from the coal fly ash with high iron oxide (48.84 wt.%) and calcium oxide (22.15 wt.%) contents. The heat resistance of geopolymer was represented by the dry weight loss which ranged from 2.5 to 4.9% and was better than that (11.7%) of OPC. However, the high iron oxide content made the acid resistance (13-14%) of geopolymer inferior to OPC. The economics of geopolymer production changes significantly upon the variation in the arrangement of material use and geopolymer price. The costs of Na2SiO3 and NaOH and the benefit of geopolymer selling were the major factors affecting the economic feasibility of geopolymer production. When the Na2SiO(3) price was around 400 USD/ton, the geopolymer production will be profitable even if the geopolymer price was as low as 50 USD/ton. It is possible to improve the economics of geopolymer production by varying the arrangement of material use while not impairing the performance of geopolymer. |
| Author Keywords |
Geopolymer; Coal fly ash; Ordinary Portland cement; Circular economy; Cost-benefit analysis |
| Index Keywords |
Index Keywords |
| Document Type |
Other |
| Open Access |
Open Access |
| Source |
Science Citation Index Expanded (SCI-EXPANDED) |
| EID |
WOS:000449125800025 |
| WoS Category |
Engineering, Environmental; Environmental Sciences |
| Research Area |
Engineering; Environmental Sciences & Ecology |
| PDF |
https://eprints.gla.ac.uk/168642/7/168642.pdf
|