| Title |
Effects of Mn addittion, cooling rate and holding temperature on the modification and purification of iron-rich compounds in AlSi10MnMg(Fe) alloy |
| ID_Doc |
26542 |
| Authors |
Sanchez, JM; Arribas, M; Galarraga, H; de Cortazar, MG; Ellero, M; Girot, F |
| Title |
Effects of Mn addittion, cooling rate and holding temperature on the modification and purification of iron-rich compounds in AlSi10MnMg(Fe) alloy |
| Year |
2023 |
| Published |
Heliyon, 9, 2 |
| DOI |
10.1016/j.heliyon.2023.e13005 |
| Abstract |
The use of secondary aluminum alloys in industry is still limited by the high Fe contents in recycled alloys. In general, the Fe-rich intermetallic compounds deteriorate the performance of secondary Al-Si alloys, specially the 0-Fe phase. To mitigate the detrimental effects of iron, the influence of diferent cooling rates and holding temperatures on the modification and purification of iron-rich compounds in commercial AlSi10MnMg alloy with 1.1 wt % Fe was studied. Ac-cording to the results obtained by CALPHAD calculations, the alloy was modified by adding a 0.7 wt%, 1.2 wt%. and 2.0 wt% of Mn. The phase formation and morphology of iron-rich compounds was systematically studied and correlated by different microstructural characterization tech-niques. The experimental results showed that the detrimental 0-Fe phase can be avoided by adding at least 1.2 wt % of Mn at the studied cooling rates. Finally, the effect of different holding temperatures in the sedimentation of Fe-rich compounds also was studied. Hence, the gravita-tional sedimentation experiments at different holding times and temperatures were conducted to validate the feasibility of the methodology in different processing conditions. The experimental results showed a high Fe removal efficiency up to 64% and 61%, after a holding time of 30 min at 600 degrees C and 670 degrees C, respectively. The addition of Mn improved the Fe removal efficiency but not gradually, as the best results were obtained in the alloy containing 1.2 wt % Mn. |
| Author Keywords |
Aluminum alloys; Circular economy; Fe-rich phases; CALPHAD; Recycling; Precipitation; Solidification; Sedimentation |
| Index Keywords |
Index Keywords |
| Document Type |
Other |
| Open Access |
Open Access |
| Source |
Science Citation Index Expanded (SCI-EXPANDED) |
| EID |
WOS:000969478800001 |
| WoS Category |
Multidisciplinary Sciences |
| Research Area |
Science & Technology - Other Topics |
| PDF |
http://www.cell.com/article/S2405844023002128/pdf
|