| Abstract |
Key performance indicator (KPI) data provide candidate information required for effective network planning, performance analysis and optimization. However, inadequate KPI data could limit efficient network planning leading to escalating operational cost, and this could adversely affect the subscribers of the network. To this end, this article presents radio frequency (RF) measurements and evaluation of KPIs taken at 1876.6MHz with a bandwidth of 10MHz, for an operational 4G LTE network in Nigeria. The measurements campaign specifically examine the behaviour of the RSRP, RSRQ, RSSI, SINR, PCC PHY DL Throughput, and the PDCP DL Throughput. Huawei Technologies Modem E392 was used for the propagation measurements, and RF measurementscover threeevolvednodebase stations (eNodeBs) with average heights of 25 m. The geographical coordinates of the sites are as follows: Site 1 (Latitude 6.43543333; Longitude 3.44539667), Site 2 (Latitude 6.55639500; Longitude 3.36693333), and Site 3 (Latitude 6.51879500; Longitude 3.39911000). The E392 4G (LTE) Modem is capable of propagation measurements at the various LTE frequency bands, enables LTE download Speed of 100 Mbit/s, supports LTE upload Speed of 50 Mbit/s, utilizes LTE 2x2 MIMO (Multiple Input Multiple Output), and supports 64QAM (Quadrature Amplitude Modulation). The Drive Test (DT) Software version-Genex prove V16, and Genex Assistance V16 were deployed, and the test car carried a test terminal station, a GPS, aWindows supported Computer, and the accompanying drive test system. The test vehiclewas driven such that it considered the actual road traffic conditions at a relatively medium speed of up to 30km/h with uniformity thereby reducing possible Doppler effects. Terminal connection was established, and data download services was started (using file transfer protocol - ftp, a drive test software, which has the function to download a large file of around 20GB). Thereafter, the download simultaneous file downloading limit was set to 5 files (such that 5 files can be downloaded simultaneously with quality download speed). When connection drops, simultaneous connection was re-established using the ftp software, and drive test was carried outwithin a planned cluster on a bright and sunny day. Statistical descriptions and probability distribution functions of the KPI data is reported and interdependence amongst the KPIs are presented to ease understanding of the interrelationships among the tested KPIs. The data reportedwould find useful applications in RF planning, radio channel measurements and modelling, feasibility studies and formulation of appropriate regulatory policies forwireless communication systems. Network operators could leverage on the data for appropriate KPI analyses, radio resources management, and research and development. (C) 2020 The Author(s). Published by Elsevier Inc. |