| Title | Properties of calcium aluminate blended cement incorporating iron-rich slag: Evolution over a curing period of 1 year |
|---|---|
| ID_Doc | 15140 |
| Authors | Astoveza, J; Trauchessec, R; Soth, R; Pontikes, Y |
| Title | Properties of calcium aluminate blended cement incorporating iron-rich slag: Evolution over a curing period of 1 year |
| Year | 2021 |
| Published | |
| Abstract | With an outlook directed towards circular economy, the valorization of municipal waste streams and industrial residues has recently conveyed a variety of novel industrial by-products to various applications such as supplementary cementitious materials (SCM) in cement blends or as precursors to inorganic polymers. Despite the synergistic benefits on recycling, reducing the cost and the carbon footprint of cements, the use of such non-conventional SCM is often limited to ordinary Portland cement (OPC)-based formulations. This study investigates the properties of a calcium aluminate cement (CAC)-based blend incorporating 30 wt% of iron (Fe)-rich slag produced at pilot scale from an industrial lead-zinc production. Compressive and flexural strength (EN 196-1 standard mortars), setting time, dimensional stability (Walter + Bai shrinkage measuring test), early hydration reactions (isothermal calorimetry), and phase assemblage evolution (XRD and TGA) were followed from 1 day to 1 year of curing period for both the slag-containing- and a corresponding reference cement formulation. Additionally, a fast non-destructive technique for quantifying the degree of slag hydration is demonstrated using a combination of X-ray computed tomography (XCT) and volume analysis based on grayscale threshold segmentation. The results from the different techniques suggest the long term (>28 days) reactivity of the slag with the slag-containing mortars attaining a comparable compressive strength of 39 MPa versus 41 MPa of the corresponding reference mortars at 90 days. Likewise, the prominent contribution of the slag to the hydration reactions is manifested by the differences in the evolution of the phase assemblage of the two formulations. The degree of slag hydration was calculated to progressively increase over time reaching up to 49% after 1 year of hydration based on the XCT scans. These results along with the long term dimensional stability of the slag-containing formulation support the potential for valorization of the Fe-rich slag as SCM in the CAC-based blend. (C) 2021 Elsevier Ltd. All rights reserved. |
Similar Articles
| ID | Score | Article |
|---|---|---|
25108
|
Kyrilis, E Upcycling of Slags from Ferrovanadium Production as Low-Carbon Footprint Cement for Refractory Castables(2024)Journal Of Sustainable Metallurgy, 10, 1 | |
| 15644
|
Nicula, LM; Manea, DL; Simedru, D; Cadar, O; Dragomir, ML; Ardelean, I; Corbu, O Potential Role of GGBS and ACBFS Blast Furnace Slag at 90 Days for Application in Rigid Concrete Pavements(2023)Materials, 16, 17 | |
| 22180
|
Czop, M; Lazniewska-Piekarczyk, B Use of Slag from the Combustion of Solid Municipal Waste as A Partial Replacement of Cement in Mortar and Concrete(2020)Materials, 13.0, 7 | |
| 19007
|
Li, YL; Yuan, Q; Li, JB Calcined Cutter Soil Mixing Residue-Based Alkali-Activated Cement: Compressive Strengths, Reaction Products, and Sustainability(2022)Acs Sustainable Chemistry & Engineering, 10.0, 1 | |
| 10663
|
Arce, A; Le Galliard, C; Komkova, A; Papanicolaou, CG; Triantafillou, TC Optimal design of ferronickel slag alkali-activated mortar for repair exposed to high thermal load(2023)Materials And Structures, 56, 2 | |
| 18599
|
Schraut, K; Adamczyk, B; Adam, C; Stephan, D; Meng, B; Simon, S; von Werder, J; Hirsch, T; Manninger, T Effect of gypsum on the hydration of fused cement clinker from basic oxygen furnace slag(2023)Advances In Cement Research, 36.0, 2 | |
| 14086
|
Sargent, P; Sandanayake, M; Law, DW; Hughes, DJ; Shifa, F; Borthwick, B; Scott, P Strength, mineralogical, microstructural and CO2 emission assessment of waste mortars comprising excavated soil, scallop shells and blast furnace slag(2024) | |
| 5061
|
Wijesekara, DA; Sargent, P; Hughes, DJ; Ennis, CJ Sintered Bottom and Vitrified Silica Ashes Derived from Incinerated Municipal Solid Waste as Circular Economy-Friendly Partial Replacements for Cement in Mortars(2024)Waste And Biomass Valorization, 15, 5 | |
| 23966
|
Delgado-Plana, P; García-Díaz, A; Bueno-Rodríguez, S; Quesada, DE Influence of NaOH molarity and Portland cement addition on performance of alkali activated cements based in silicomanganese slags(2023) | |
| 10796
|
Li, JW; Xu, D; Wang, XJ; Wang, K; Wang, WL Synergetic-Complementary Use of Industrial Solid Wastes to Prepare High-Performance Rapid Repair Mortar(2021) |