| Title |
Synergetic-Complementary Use of Industrial Solid Wastes to Prepare High-Performance Rapid Repair Mortar |
| ID_Doc |
10796 |
| Authors |
Li, JW; Xu, D; Wang, XJ; Wang, K; Wang, WL |
| Title |
Synergetic-Complementary Use of Industrial Solid Wastes to Prepare High-Performance Rapid Repair Mortar |
| Year |
2021 |
| Published |
|
| DOI |
10.3389/fmats.2021.792299 |
| Abstract |
With the vigorous development of infrastructure engineering, there are growing demands for high-performance rapid repair mortar, especially those using environmental-friendly and low-carbon cementitious materials. Hereupon, this work explored an innovative approach for rapid repair mortar preparation using solid waste-based calcium sulfoaluminate cement. The calcium sulfoaluminate cement was first prepared via synergetic-complementary use of industrial solid wastes and then adopted to prepare rapid repair mortar by proportionally mixing with standard sand and four additives (i.e., polycarboxylate superplasticizer, lithium carbonate, boric acid, and latex powder). The mechanistic analysis indicated that the four additives comprehensively optimized the mechanical strengths, fluidity, and setting time of rapid repair mortar by adjusting the hydration process of calcium sulfoaluminate cement. The test results showed that the 2-h compressive and flexural strength, and 1-day bonding strength of the prepared rapid repair mortar were 32.5, 9.2, and 2.01 MPa, respectively, indicating excellent early-age mechanical performance. In addition, the 28-day compressive and flexural strengths of the rapid repair mortar reached 71.8 and 17.7 MPa. Finally, a life cycle assessment and economic analysis indicated that this approach achieved environmental-friendly utilization of industrial solid wastes, and cost-effective and energy-saving natures, which supports current trends towards a circular economy and green sustainable development. |
| Author Keywords |
rapid repair mortar; sulfate-based cements; industrial wastes; recycling; environmental friendliness |
| Index Keywords |
Index Keywords |
| Document Type |
Other |
| Open Access |
Open Access |
| Source |
Science Citation Index Expanded (SCI-EXPANDED) |
| EID |
WOS:000731002200001 |
| WoS Category |
Materials Science, Multidisciplinary |
| Research Area |
Materials Science |
| PDF |
|